Inno Fader

SHOW ALL 5 RESULTS

  • Innofader Innobender

    This is a special Innofader model designed to work with smal
    Quick Overview

    This is a special Innofader model designed to work with small mixer and midi controllers.

    It is designed to work with compact mixers and controllers such as the Vestax VCI-300mkII and the Traktor Kontrol S4

    This model can also be used for all of the mixers which work with the original Innofader. Just beware that the wiring on the adapter J4 cable is reversed and you’ll need to reverse it back to its original wiring to work normally. For any technical support or issues with your fader or fader installation please check the Innofader website. There they have tutorials and instructions on how to install the fader and make sure it is working properly.

    Here is a list of all of the compatable Mixers and Controllers:

    Vestax VCI-300

    Traktor S.4

    Pioneer DJM-400

    Pioneer DJM-350

    Stanton m.207

    Mackie d.2

    Go Live Chat

  • InnoFader PNP

    The Audio Innovate innoFADER PNP is a premium, replacement n
    Quick Overview

    The Audio Innovate innoFADER PNP is a premium, replacement non-contact, user-customizable DJ crossfader.  That’s a very long way of saying that the innoFADER PNP is quite possibly the best replacement crossfader on the market!

     

    In the past, replacing your mixer’s stock crossfader with an innoFADER was sometimes a cumbersome process and a bit of a science experiment.  Miscellaneous cables & adapters made the innoFADER a bit of a puzzle.  Not to mention you could potentially short the innoFADER out by coming into contact with other parts in the mixer.  Those days are over.  Built on the success of the original innoFADER, the innoFADER PNP has now arrived!!

     

    The innoFADER PNP is a plug-n-play version of the original innoFADER.  Same outstanding fader…completely revolutionized usability.  For a complete listing of compatible mixers, or to determine which innoFADER you should buy for your particular mixer, please visit Audio Innovate’s compatibility chart.

    Go Live Chat

  • InnoFader PRO

    The Audio Innovate innoFADER PRO is a premium, non-contact r
    Quick Overview

    The Audio Innovate innoFADER PRO is a premium, non-contact replacement crossfader that uses the same quality construction as the original innoFADER and fits the following mixers:

    1) All Ecler mixers

    2) All Rane mixers (excluding the Empath which uses the innoFADER PNP)

    3) All A&H Xone mixers (excluding the Xone:92, which uses the innoFADER PNP)

    4) All mixers previously requiring the Innofader + Innofader Output Adapter (Tascam XS-4, XS-8, old Ecler HAK 300/310/320)

    5) Numark M series and Vestax VMC-002 without mods

    6) Virtually any analog mixer that fits it, but possibly requiring mods.

    Go Live Chat

  • Mini Innofader PNP-P

    The Audio Innovate mini Innofader PNP P is a user replaceabl
    Quick Overview

    The Audio Innovate mini Innofader PNP P is a user replaceable plug-in “P” version of the mini Innofader replacement crossfader.  The mini Innofader PNP P builds on the simplicity of the Innofader PNP and provides a simple alternative to the Innobender. Plus the mini Innofader PNP P version works as a replacement fader for even the tightest of mixer and controller spaces.  Replace virtually any crossfader imaginable with a mini Innofader PNP!

    What’s the difference between the mini Innofader PNP P vs mini Innofader PNP S?  Essentially, both are identical crossfaders mechanically.  The mini Innofader PNP P is a plug-in style replacement crossfader which uses a cable to connect to the mixer.  The mini Innofader PNP S is a solder version which gets soldered directly to the mixer’s circuit board.  Be sure to check the links at the bottom of the page for the compatible mixer fitting guide and manuals.

    Go Live Chat

  • Mini Innofader PNP-S

    The Audio Innovate mini Innofader PNP S is a user replaceabl
    Quick Overview

    The Audio Innovate mini Innofader PNP S is a user replaceable solder “S” version of the mini Innofader PNP replacement crossfader.  Replace virtually any crossfader imaginable with a mini Innofader PNP!  No longer are you “stuck” when your controller has a compact fader soldered to the PC board. Having the solder pin “S” version means you can essentially transform your average controller into a pro model. We even included an external switch so you can adjust the mini Innofader PNP S without having to remove it.  The Mini Innofader PNP S offer the features you demand on a long life fader:

    What’s the difference between the mini Innofader PNP P vs mini Innofader PNP S?  Essentially, both are identical crossfaders mechanically.  The mini Innofader PNP P is a plug-in style replacement crossfader which uses a cable to connect to the mixer.  The mini Innofader PNP S is a solder version which gets soldered directly to the mixer’s circuit board.  Be sure to check the links at the bottom of the page for the compatible mixer fitting guide, calibration & jumper settings.

    Go Live Chat