Behringer 2600-VCO
Behringer 2600-VCO - Image 2
Behringer 2600-VCO - Image 3
, ,

Behringer 2600-VCO

Brands: Behringer
Brands
  • Classic Voltage-Controlled Oscillator
  • Reproduction of ARP 2600 Circuitry
  • VCO Waveforms: Sine, Tri, Saw, Pulse
  • Wide Frequency Control

$92.00

Module for Eurorack (16 HP)

Add the classic sound of ARP to your modular rig with the Behringer 2600-VCO, a full-featured voltage-controlled oscillator for Eurorack that features the authentic reproduction of the original ARP 2600 circuitry.

The module includes four discrete waveform outputs (sine, triangle, saw, pulse) and a wide frequency range. With Audio KYBD On switch engaged, the module offers 10 Hz to 10 kHz, while the KYBD OFF LF switch allows for LFO duties with a range of 0.3 to 30 Hz. There are five CV inputs including PWM, which can also be adjusted manually. The 2600-VCO ships with a ribbon power cable and mounting screws.

Benefits
  • Remarkable sounding VCO module from the ’70s
  • Authentic reproduction of original ARP 2600 circuitry
  • VCO features 4 simultaneous waveforms: sine, triangle, saw and pulse
  • VCO offers wide frequency control from 10 Hz to 10 kHz or 0.03 Hz to 30 Hz in LF mode
  • PWM can be simultaneously controlled manually and via external CV input
  • Switchable between LF (keyboard off) and Audio (keyboard on)
  • Separate outputs for each waveform and 5 CV inputs for pitch control and PWM
  • 8 controls and switches give you real-time access to all important parameters
Mix It Up
The 2600-VCO is a feature-rich module with four simultaneous waveforms: sine, triangle, saw, and pulse, which allow for an awe-inspiring palette of tonal possibilities. You can even control the oscillator’s frequency, which ranges from 10 Hz to 10 kHz and from 0.03 to 30 Hz when the 2600-VCO is switched to LF mode. The VCO can also be tuned to other instruments or VCOs with the Fine Tune knob. Adjust the pulse width range anywhere from 10 to 90%, and you’ll be ready to rock whether you’re in a band or integrating the 2600-VCO into your setup.
Ins and Outs
The 2600-VCO comes with an array of FM and CV inputs. Each FM input comes with their own attenuator to control the level of modulation. A separate PWM input can be used if you want to control or modulate the Pulse waveform. The 2600-VCO even accepts control voltages from a keyboard or MIDI/CV converter which you can turn on or off with the Keyboard On/Off switch, which also switches the VCO to low-frequency mode.
Eurorack Ready
Installing the 2600-VCO is easy as it is designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and screw in the module using the included screws. This allows the 2600-VCO to be mixed with other synth modules for a truly unique setup.

  • Horizontal Pitch: 16 HP
  • Power Requirements: 140mA +12V, 5mA -12V

FEATURES

  • Classic Voltage-Controlled Oscillator
  • Reproduction of ARP 2600 Circuitry
  • VCO Waveforms: Sine, Tri, Saw, Pulse
  • Wide Frequency Control
  • 10 Hz to 10 kHz (0.03 to 30 Hz, LF Mode)
  • PWM with Manual or CV Control
  • Individual Outputs for Each Waveform
  • 8 Controls and Switches
  • Includes Ribbon Power Cable
  • Includes Mounting Screws
Categories: , , Tags: , , Brand:
Brands

Roland
Product Type

Module, Production & Groove
Controls
Initial Oscillator Frequency Fader Sets Oscillator Frequency: (10 Oct. Range)
Fine Tune Knob: Oscillator Fine Tune Adjustment (±0.4 Oct.)
Audio (Kybd On) / LF (Kybd Off) Slide Switch: Select Audio Band (10 Hz to 10 kHz) Or LFO (0.03 Hz to 30 Hz)
FM 1 / 2 /3 Faders: Attenuate FM Inputs (-∞ to Unity Gain)
Pulse Width Fader: Pulse Width Adjustment (10% To 90%)
PwM Fader: Pulse Width Modulation Attenuator (-∞ to Unity Gain)
Signal Connectors
Inputs

Keyboard CV
Type: 1 x 3.5 mm TS Jack, DC Coupled
Impedance: 100 Kilohms, Unbalanced
CV Range: 10 V, 1 V/Octave

FM 1 / 2 / 3 CV
Type: 3 x 3.5 mm TS Jacks, DC Coupled
Impedance: 50 Kilohms, Unbalanced
CV range: 10 V, 1 V / Octave

PWM CV
Type 1 x 3.5 mm TS Jack, DC Coupled
Impedance: 75 Kilohms, Unbalanced
CV Range: 10 V, Typically 1 V/10%

Outputs

TRI/SINE/SAW/PULSE
Type: 4 x 3.5 mm TS Jacks, DC Coupled
Impedance: 1 Kilohm, Unbalanced
TRI Level: ±5 V
SINE Level: ±5 V
SAW Level: 0 V / +10 V
PULSE Level: 0 V / +10 V
Power
Power Supply: Eurorack
Current Draw: 140 mA (+12 V), 5 mA (-12 V)
Horizontal Pitch
16 HP
Dimensions
5.1 x 3.2 x 1.7″ / 13.0 x 8.1 x 4.3 cm
Weight
0.4 lb / 0.2 kg
Packaging Info
Package Weight
0.55 lb
Box Dimensions (LxWxH)
6.7 x 4 x 1.9″

Based on 0 reviews

0.0 overall
0
0
0
0
0

Only logged in customers who have purchased this product may leave a review.

There are no reviews yet.

You may also like…

Related products