JBL Control 85M
JBL Control 85M - Image 2
JBL Control 85M - Image 3
, ,

JBL Control 85M

Brands: JBL
Brands
  • 5.25″ weather-resistant driver
  • 0.75″ soft-dome weather-resistant tweeter
  • 80W pink noise power handling (160W program) in direct 8-Ohm setting, plus built-in 30W 70/100V multi-tap transformer
  • Tough polyethylene weather-resistant enclosureFully isolated center chamber for wiring protection

$569.00

Two-Way 5.25″ Coaxial Mushroom Landscape Speaker

Designed for outdoor applications, the Control 85M from JBL is a weather-resistant mushroom-shaped coaxial speaker offering 360° coverage and a broad frequency range of 55 Hz to 18 kHz. Mounted on or in the ground it provides quality music and paging in a variety of locations including shopping malls, theme parks, sports venues, hotels, casinos, resorts, restaurants, hospitality facilities, and entrance ways. The speaker’s compact enclosure is unobtrusive and blends in with its surroundings. It resists abuse from lawn care equipment and the elements and maintains its hunter green color even when scraped or scratched.

FEATURES

  • 5.25″ weather-resistant driver
  • 0.75″ soft-dome weather-resistant tweeter
  • 80W pink noise power handling (160W program) in direct 8-Ohm setting, plus built-in 30W 70/100V multi-tap transformer
  • Tough polyethylene weather-resistant enclosureFully isolated center chamber for wiring protection
  • High-fidelity sound character with broad frequency range of 55 Hz to 18 kHz
  • Two-Way Speaker Design
  • Polyethylene Weather-Resistant Enclosure
  • 55 Hz – 18 kHz Frequency Response
  • 160W Continuous Program, 2 Hours Max
  • 360°/160° H/V Nominal Coverage
  • Fully Isolated Wiring Chamber
  • IP-55 Rated
  • Mounting Hardware Included
Categories: , , Tags: , Brand:
Brands

JBL
Product Type

Speakers
Frequency Response (-10 dB)
55 Hz – 18 kHz
Power Rating
160 W continuous program (2 h)
80 W (320 W peak), continuous pink noise (2 h)
45 W (180 W peak), continuous pink noise (100 h)
Transformer Taps
70 V: 30, 15, 7.5, and 3.8 W
100 V: 30, 15, and 7.5 W
Frequency Response ± 3dB
65 Hz – 16 kHz
Maximum Input Voltage
23.3 V
Sensitivity
86 dB, 1 W at 3.28′ / 1 m (average 80 Hz – 16 kHz)
Nominal Coverage Angle
360° horizontal, 160° vertical (primary listening 10° to 50° up from ground)
Directivity
Q Factor: 2.2
Directivity Index
3.4 dB
Maximum SPL
105 dB at 3.28′ / 1 m
Nominal Impedance
8 Ohms (at 8-Ohm setting)
Insertion Loss
Up to 1.0 dB at any tap setting
Thru
8 Ohms nominal
Crossover Type
2nd order LPF on LF and 2nd order HPF on HF
Recommended Protective High-Pass
65 Hz for 8-Ohm operation, 24 dB/octave
60 Hz for 30 W tap, 24 dB/octave
50 Hz for 15, 7.5, and 3.7 W taps, 24 dB/octave
Low-Frequency Driver
5.25″ / 13.5 cm diameter LF driver, Kapton former, 1.4″ / 3.55 cm voice coil, polypropylene cone and polyurethane surround
High-Frequency Driver
0.75″ / 1.9 mm diameter HF driver polyetherimide (PEI) dome
Enclosure Material
LDPE polyethylene plastic, 0.23″ / 6 mm wall thickness, UL94V-0 rated
Grille
Powder-coated stainless steel
Environmental
IP-55 rating per IEC529 (dust protected and protected against jets of water)
Exceeds MIL-STD 810 for humidity, salt spray, temperature & UV
Passes MIL-STD 202F for salt spray
Enclosure UL94V0 rated
Agency Rating
UL1480, transformer UL recognized per UL1876, ROHS compliant
Terminals
Bare wire with dielectric-gel-filled wire nuts (internal to top speaker section)
Wiring
Water ingress protected by two stages of gland nuts, one mounted on outside of enclosure (installed by installer via drilling 0.87″ / 22 mm hole in any of multiple provided locations) and one between the bottom base and top speaker sections. Included gland nuts require round-jacketed wire with outside diameter between 0.16″ / 4.0 mm and 0.35″ / 9.0 mm.
Dimensions
17.0 x 11.5 x 11.5″ / 43.2 x 29.1 x 29.1 cm
Weight
12 lb / 5.5 kg

Based on 0 reviews

0.0 overall
0
0
0
0
0

Only logged in customers who have purchased this product may leave a review.

There are no reviews yet.

You may also like…

Related products