,

Adam Audio Sub 10 Mk2

Brands: Adam Audio
Brands
  • Ideal addition to nearfield and midfield monitors
  • Powerful, compression-free sound reproduction even at very high sound levels
  • Low-distortion amplification at both low and high volume levels
  • Unrestricted bass reproduction for low-fatigue operation even at high volumes

$2,999.00

The Sub10 MK2 is a powerful subwoofer designed to extend the low frequency capabilities of any near or midfield monitoring system down to 25Hz.

A sturdy special woofer with extended cone travel and a heavy-duty coil have been optimized for accurate reproduction from a bass reflex enclosure. The down-firing bass reflex tube avoids intrusive ventilation noise because of its generous size and shape. The PWM amplifier produces over 90% efficiency and can handle critical passages without overheating for long periods of time. An additional output allows you to cascade as many subwoofers as needed.

The Sub10 MK2 subwoofer provides a precise combination of low cutoff frequency (-3 dB at 25Hz) and an undistorted high sound pressure level (113dB at 1m).

FEATURES

Linear bass reproduction down to 25 Hz Ideal addition to nearfield and midfield monitors
Maximum Peak sound pressure in 1 m ≥ 113 dB Powerful, compression-free sound reproduction even at very high sound levels
High efficiency PWM amplifier Low-distortion amplification at both low and high volume levels
Special 10″ woofer with paper diaphragm Unrestricted bass reproduction for low-fatigue operation even at high volumes
Easy manual or automatic (de-)activation If desired, monitoring is possible without the low frequencies
According to downward working bass reflex tube with generous dimensions and corresponding rounding Prevention of air turbulence noise
Upper cut-off frequency is selectable between 50 – 150 Hz Allows optimal adaptation of the total system on the bass performance of the satellites
Connectable high-pass filter for the satellite outputs, which blocks signals below 85 Hz
  • Dolby®- Fair reproduction of film sound
  • Discharging the satellites from the low frequencies
2 years warranty with optional extension to 3 years with the registration of the product Full repair service if required for 5 years
Categories: , Tags: , ,

Specifications

Brands

Adam Audio
Color

Black
Product Type

Studio Subwoofers

SUBWOOFER

Number 1
Basket Ø 10″ (260 mm)
Voice Coil Ø 2″ (50 mm)
Cone Material Paper

BUILT-IN AMPLIFIERS

Subwoofer 1
Type PWM
Amp. Power RMS / Music 200 W / 300 W

INPUT CONNECTORS

Analog XLR / RCA

GENERAL DATA

Frequency Response 25 Hz – 150 Hz
THD > 60 Hz ≤1 %
Max. peak SPL at 1 m ≥113 dB
Crossover Frequencies 50 – 150 Hz
Input Impedance 10 kOhm
Panel Rear
Weight 46.3 lb (21 kg)
Height x Width x Depth 22″ (560 mm) x 12″ (300 mm) x 15.5″ (400 mm)
Warranty 5 years (2 years warranty plus 3 years optional with product registration)
Delivery Contents Power cord, manual

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Adam Audio Sub 10 Mk2”

There are no reviews yet.

You may also like…

Related products