AKG C3000
- Gold-sputtered 1-inch large diaphragm with patented edge-terminated back-plate technology
- Proven performance for more than 15 years for both studio and stage
- Internal windscreen protects from wind and breath generated “pops”
- Well designed circuitry provides high SPL capability and low distortion
The C3000 high-performance, large-diaphragm condenser microphone has been a standard for live applications and studio recording for almost two decades. It is an excellent choice for vocals, electric and acoustic guitars, drum overhead and brass instrument miking. The switchable attenuation pad and low-cut filter enable high SPL up to 150dB and eliminate proximity effect.
The redesigned C3000 presents itself as a cost-effective, rugged workhorse with a sleek and classy finish.
- Proven performance for more than 15 years
The standard for live applications and studio recording
- Ultralow-noise electronics and switchable attenuation pad
Enable high dynamic range and allow SPL up to 150dB
- Switchable low-cut filter
Eliminates proximity effect
- Classic sound made affordable
Gold-sputtered one-inch capsule tuned in the tradition of AKG’s sonic expertise
- Heavy-duty die-cast metal housing
Provides maximum protection on stage and in the studio
FEATURES
- Gold-sputtered 1-inch large diaphragm with patented edge-terminated back-plate technology
- Proven performance for more than 15 years for both studio and stage
- Internal windscreen protects from wind and breath generated “pops”
- Well designed circuitry provides high SPL capability and low distortion
- Switchable attenuation pad enables for high SPL up to 150 dB
- Switchable low cut filter (500Hz, 6 dB/octave) eliminates proximity effect
- Comes complete with H 85 spider-type shockmount
| Brands | AKG |
|---|---|
| Product Type | Condenser Microphones |
| Color | Black |
| Transducer | Condenser |
| Polar Pattern | Cardioid |
| Frequency Response | 20Hz to 20kHz |
| Sensitivity | 20 mV/Pa (-32 dBV) |
| Signal-to-Noise Ratio | 80dB (A-Weighted)
Equivalent Noise Level: 14dB-A |
| Maximum Input Sound Level | 140/150 dB (k=0.5%) |
| Power Requirements | Phantom 9 – 52V to IEC 61938
Powering < 2mA |
| Output Impedance | 200 Ohms
Recommended Load: > 1000 ohms |
| Output Connectors | XLR-3M Type |
| Pad | -10dB |
| Low Frequency Roll-Off | 500Hz |
| Dimensions | 6.4 x 2.1″ (162 x 53mm) LxD |
| Weight | 11.3 oz (320g) |
Based on 0 reviews
Only logged in customers who have purchased this product may leave a review.
You may also like…
-
Production & Groove, Studio & Recording
Rode RODECaster Pro
- You can even select the color of your choice for the pad illumination, a convenient way to remember which effect is on which pad.
- Interview a Guest Remotely via Phone Call
- Interview a guest for your podcast remotely, via a phone call or apps like Skype, FaceTime, and more.
- Prevent echos.
SKU: n/a
Related products
-
Dynamic Microphones, Microphones, Podcasting
Audio Technica AT2040
- XLR Output connects to a conventional analog microphone input providing versatile use with everything from multi-input home studio computer interfaces to professional mixing consoles.
- The mic features a specially designed, integrated shock mount that tames noise, shock and vibration that’s transmitted through a mic stand, boom or mount.
- The AT2040’s multistage foam mesh windscreen includes a nonwoven filter to allow close-up use without annoying pops.
- With rugged, all-metal construction and a sound signature that commands attention, the AT2040 gives creators professional performanceat an affordable price.
SKU: n/a -
Dynamic Microphones, Microphones
Audio Technica AT2050
- Three switchable polar patterns: omni, cardioid, figure-of-eight
- Switchable 80 Hz high-pass filter and 10 dB pad
- Large diaphragm for smooth, natural sound and low noise
- State-of-the-art surface-mount electronics ensure compliance with A-T’s stringent consistency and reliability standards
SKU: n/a
There are no reviews yet.