Alesis Strike Amp 12 MK2


Brands: Alesis
Brands
  • For Electronic Drum Kits and Multipads
  • 2500W Peak Power for Tons of Headroom
  • 12″ Woofer and 1″ Compression Driver
  • Wedge, Upright, or Pole Mounting

$549.00

2500W 12″ Drum Amplifier with Bluetooth

Experience massive headroom and crisp sound during your live performances with the Strike Amp 12 MK2 from Alesis, a high-performance, bi-amped 2500W speaker designed for electronic drum kits and multipad instruments. With flexible wedge, vertical, and pole-mounting options, this speaker fits any live setup.

Sporting a 12″ woofer, a 1″ compression driver, and a max SPL of 132 dB, this speaker delivers crystal-clear during performances. Each XLR-1/4″ combo input can accept a variety of sources and features independent volume adjustment. You can stream content directly from your smart devices via Bluetooth for convenient playback during rehearsals and breaks. And with built-in HPF and ground-lift switches, you can tame any unwanted noise that creeps into your signal. The Strike Amp 12 MK2 includes a power cable.

A Powerful Partner for Electronic Drums

The Alesis Strike Amp 12 MK2 is a high-performance, bi-amped speaker specially designed for Electronic Drums. Strike Amp 12 MK2’s performance is exceptional, with a max 132 dB SPL and a 44 Hz to 20 kHz frequency range; wide enough to deliver the full thump of your kick drum, right up to the crystal-clear snap of your snare and hi-hats.

All the Connections You Need, Including Bluetooth

Strike Amp 12 MK2 features two combo XLR-1/4″ combo inputs for connecting your electronic drum kit and/or multipad instrument, each with their own independent volume controls. You can also wirelessly connect a mobile device to the Strike Amp 12 MK2 via Bluetooth, so you can stream music wirelessly while rehearsing or during set breaks. There is also an XLR output for chaining more than one speaker together or sending the signal from your Strike Amp out to a front of house mix.

Adapts to Any Stage or Room

Stages and rehearsal rooms can easily become dense and muddy sounding as lower frequencies from different instruments battle each other; Strike Amp 12 MK2 has a HPF EQ switch to quickly pull troublesome frequencies out and make sure your tone sits perfectly in the mix. Unwanted electrical noise can also be a common problem; Strike Amp 12 MK2’s ground lift switch can eliminate hums and buzzes resulting from ground loops.

Road-Ready Lightweight Design

Strike Amp 12 MK2 is rugged yet lightweight and easy to transport (at 34.7 lb) making load-ins at the gig or rehearsal space easier than ever. While you can use Strike Amp 12 MK2 in its intended wedge position, its versatile design means that it can also be used in an upright or pole-mounted position, making it easier to direct your sound wherever you need it, which is especially helpful at outdoor gigs or other places where PA backline is limited.

FEATURES

  • For Electronic Drum Kits and Multipads
  • 2500W Peak Power for Tons of Headroom
  • 12″ Woofer and 1″ Compression Driver
  • Wedge, Upright, or Pole Mounting
  • 2 x XLR-1/4″ Combo Inputs
  • XLR Direct Mix Output
  • Bluetooth for Streaming from Devices
  • Ground-Lift and HPF Switch
  • Rugged yet Portable
  • Includes Power Cable
Category: Tags: ,
Output Power 2500W
Drivers 1 x 12″ / 30.5 cm Woofer with 2.5″ / 6.3 cm High-Temperature Voice Coil

1 x 1″ / 2.5 cm Ceramic Compression Driver with 1.4″ / 3.5 cm Voice Coil

Crossover Frequency 2 kHz
Maximum SPL 132 dB
Frequency Response 53 Hz to 20 kHz (±3 dB)
Frequency Range 44 Hz to 20 kHz (-10 dB)
Coverage 90° Horizontal x 60° Vertical (Nominal)
Input Impedance Balanced: 10 Kilohms (Line)

Unbalanced: 20 Kilohms (Line)

Gain Control Infinity to 0 dB
Maximum Output Level +10 dBu

Inputs / Outputs

Audio I/O 2x Combo XLR-1/4″ 3-Pin Hi-Z/Instrument/Line/Mic Input (Balanced)

1x XLR 3-Pin Output (Link)

Wireless

Wireless Bluetooth 5.0

*Built-In

Bluetooth 5.0

Power

Power Source AC Input (Included)
AC Input Power 100 to 240 VAC, 50 / 60 Hz
Power Consumption 1100 W

Environmental

Environmental Protection No
Operating Temperature 14 to 113°F / -10 to 45°C

Physical

Mounting Side: 1x 36mm Pole Socket
Color Black
Dimensions 23.9 x 13.9 x 13.8″ / 60.7 x 35.3 x 35.1 cm (W x D x H)
Weight 34.7 lb / 15.7 kg

Packaging Info

Package Weight 41.8 lb
Box Dimensions (LxWxH) 27.5 x 18.45 x 18.25″

Based on 0 reviews

0.0 overall
0
0
0
0
0

Only logged in customers who have purchased this product may leave a review.

There are no reviews yet.

You may also like…