Audient ASP880
Out of stock
- 8x Class-A Audient Console Mic Pres
- 2x Channels with Saturation Controls
- 2x Discrete JFET Instrument Inputs
- 118 dB Burr-Brown A-D Converters
$1,450.00
Out of stock
8-Channel Microphone Preamplifier and ADC
Intended for professional recording studios, the Audient ASP880 offers eight Class-A microphone preamplifiers from the company’s consoles designed by David Dearden via XLR/TRS combo connectors as well as Burr Brown analog to digital conversion in an all-metal 1RU 19″ rackmountable enclosure. It also features a pair of front panel Class-A JFET 1/4″ DI instrument inputs for recording guitars, keyboards, drum machines, and more.
Each channel features a selectable +48V phantom power button, a selectable pad, a selectable polarity reverse switch, a variable high-pass filter, and a switch for inserting a signal processor between the preamplifier and A/D converter. A front-panel button allows you to select and lock the sample rate of the converter at 44.1, 48, 88.2, or 96 kHz. Digital outputs are provided by rear-panel ADAT, AES, and SPDIF connections. A word-clock input is also included.
Mic Pres
Uses renowned Class-A console mic-pre design that was optimized over the course of 18 years by David Dearden
A/D Converter
Uses high-grade Burr Brown conversion
Plug and Play
Offers eight channels of mic-pre and line inputs as well as two discrete JFET DI inputs
Analog Insert
Allows you to insert signal processors between the preamplifier and the A/D converter
HPF
Allows you to selectively attenuate unwanted low frequencies
Variable Impedance
Allows you to match the preamplifier to ribbon microphones
Construction
Features all-metal construction and hand-milled aluminum knobs
FEATURES
- 8x Audient Console Mic Pres
- Burr Brown AD Converter Technology
- Variable Input Impedance
- Variable High-Pass Filters
- 8x Insert Points Between Preamps and ADC
- 2x Class-A JFET DI Instrument Inputs
- Digital Outputs – ADAT, AES & S/PDIF
| Connections | 2x front panel 1/4″ (6.3 mm) DI inputs
8x back-panel XLR/TRS combo inputs 1x D-Sub connector for line outputs 1-8 (send) 1x D-sub connector for ADC inputs 1-8 (return) 2x ADAT Out (1-8) 1x word clock 1x AES/SPDIF |
Input
| Mic Gain Range | Mic: -10 to +60 dB (-10 dB Pad)
Line: -16 to +44 dB (-10 dB Pad) DI: -10 to +60 dB (-10 dB pad) |
| Phantom Power | 48 V +/-4 V at 10 mA/Channel |
| EIN | < -127.5 dBu |
| CMRR | > 80 dB at 100 to 10 kHz |
| Maximum Level | Mic: +22 dBu (+32 dBu with Pad)
D.I.: +16 dBu (typical), +22 dBu |
| Input Impedance | Mic LO: 220 ohms Balanced
Mic MED: 12 kOhms Balanced Mic HI: 28 kOhms balanced Line (All Z): >6 kOhms balanced D.I.: 1 MOhm unbalanced |
| Frequency Response | Mic: +/-0. 5 dB from 10 Hz to 100 kHz
D.I.: +/-0.5 dB from 10 Hz to 50 kHz |
| Crosstalk | < -85 dBu at 1,000 and 10,000 Hz |
| THD+N | Mic: 0.003% (-90.5 dBu)
DI: <0.03% (-70 dBu) |
| SNR | Mic: > 90 dB
D.I.: 89 dB |
| HPF | Sweepable from 25 to 250 Hz, 2nd Order (12 dB/Octave) |
| XLR / Phone Jack | Pin 2 (Hot), Pin 3 (Cold) & Pin 1 (Shield) |
| Phono (1/4″) | TIP (Hot), RING (Cold) & SLEEVE (Shield) |
Output
| Maximum Output Level | +27.5 dBu |
| Output Impedance | <100 ohms balanced |
A/D – D/A Conversions
| Maximum Input Level | +18 dBu |
| Reference Level | 0 dBFS = +18 dBu |
| Input Impedance | >10 kOhms balanced |
| Frequency Response | +/-0.5 dB at 10 Hz to Fs/2 |
| Crosstalk | <-80 dBu at 1 and 10 kHz |
| THD + N | -1 dBFS (1kHz): <0.002% (-94 dB)
-6 dBFS (1 kHz): <0.002% (-94 dB) |
| Dynamic Range | 113 dB unweighted
115 dB A-weighted |
| LED | PEAK LED LINEUP: +16 dBu (-2 dBFS)
SIGNAL LED LINEUP: Variable Brightness from -30 dBu to -10 dBu (-28 dBFS) |
Digital Audio I/O
| Sample Rate | ADAT 8x CHANNELS SMUX: 44.1 to 96 kHz
AES | S/PDIF 8 Channels: 44.1 to 96 kHz |
| Clock | Internal or External |
| Wordclock Input | 75 ohm BNC
Optional 75 ohm termination |
| Power Supply | Gloval low noise internal SMPS, fanless |
| Line Voltage | 90 to 264 V (a.c) |
| Rails | +/-18 VDC, +48 VDC & +5 VDC |
| Fuse | T1A (1 ampere time delay) |
| Power Consumption | Maximum 40 W |
| Dimensions | 19.0″ x 1.75 x 12.6″ (482 x 44.4 x 321 mm) |
| Weight | 8.8 lb (4.0 kg) |
Packaging Info
| Package Weight | 11.45 lb |
| Box Dimensions (LxWxH) | 22 x 15.5 x 3″ |
There are no reviews yet.