,

Audio Technica AT4040SP


Brands
  • Technically-advanced large diaphragm tensioned specifically to provide smooth, natural sonic characteristics
  • Externally polarized (DC bias) true condenser design
  • Exceptionally low noise, wide dynamic range and high-SPL capability for greatest versatility
  • Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients

Studio Microphone Pack

The AT4040SP Studio Pack offers two of Audio-Technica’s renowned 40 Series studio condenser microphones: the AT4040 large-diaphragm side-address condenser and the AT4041 cardioid condenser. Each microphone is transformerless, resulting in exceptional transient response and extremely clean output signals; each is engineered to meet the most critical acoustic requirements of professional recording, broadcast and live sound. A shock mount, stand clamp and windscreen are included, along with a protective wooden carrying case.

FEATURES

AT4040 Side-address cardioid condenser microphone

  • Technically-advanced large diaphragm tensioned specifically to provide smooth, natural sonic characteristics
  • Externally polarized (DC bias) true condenser design
  • Exceptionally low noise, wide dynamic range and high-SPL capability for greatest versatility
  • Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients
  • Precision-machined, nickel-plated brass, acoustic element baffle provides enhanced element stability and optimal sensitivity
  • Open acoustical environment of the symmetrical housing assembly minimizes unwanted internal reflections
  • State-of-the-art surface-mount electronics ensure compliance with A-T’s stringent consistency and reliability standards
  • Switchable 80 Hz hi-pass filter and 10 dB pad

AT4041 Cardioid condenser microphone

  • Smooth, extended frequency response with a slight rise occurring in the high-frequency region
  • Ideal for drum overheads, acoustic guitar, piano, horns and under snare
  • Low-mass diaphragm improves transient response, increases response bandwidth and reduces handling and mechanical noise transfer
  • Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients
  • State-of-the-art design and manufacturing techniques ensure compliance with A-T’s stringent consistency and reliability standards
  • Switchable hi-pass filter and rugged turned-brass microphone housing
Brands

Audio Technica

Color

Black

Microphones

Condenser Microphones

  • Operating Frequencies
  • 2.4 GHz ISM band (2400 to 2483.5 MHz)
  • Dynamic Range
  • >109 dB (A-weighted), typical
  • Total Harmonic Distortion
  • <0.05% typical
  • Operating Range
  • 30 m (100′) typical
  • Open range environment with no interfering signals
  • Operating Temperature Range
  • 0° C to 40° C (32° F to 104° F)
  • Battery performance may be reduced at very low temperatures
  • Frequency Response
  • 20 Hz to 20 kHz
  • Depending on microphone type
  • RECEIVER SPECIFICATIONS
  • Receiving System
  • Diversity (frequency/time/space)
  • Maximum Output Level
  • XLR, balanced: 0 dBV
  • 1/4″ (6.3 mm), unbalanced: 6 dBV
  • Power Supply
  • 100-240V AC (50/60 Hz) to 12V DC .5A (center positive) switched mode external power supply
  • Dimensions
  • 190.0 mm (7.48″) W x 46.2 mm (1.82″) H x 128.5 mm (5.06″) D
  • Net Weight
  • 290 grams (10.2 oz)
  • Accessory Included
  • Power supply
  • BODY-PACK TRANSMITTER SPECIFICATIONS
  • RF Power Output
  • 10 mW
  • Spurious Emissions
  • Following federal and national regulations
  • Input Connections
  • Four-pin Locking Connector
  • Pin 1: GND, Pin 2: INST INPUT,
  • Pin 3: MIC INPUT, Pin 4: DC BIAS 9V
  • Batteries
  • Two 1.5V AA
  • not included
  • Battery Life
  • >7 hours (alkaline)
  • Depending on battery type and use pattern
  • Dimensions
  • 70.2 mm (2.76″) W x 107.0 mm (4.21″) H x 24.9 mm (0.98″) D
  • Net Weight
  • 100 grams (3.5 oz)
  • without batteries
  • HANDHELD TRANSMITTER SPECIFICATIONS
  • RF Power Output
  • 10 mW
  • Spurious Emissions
  • Following federal and national regulations
  • Batteries
  • Two 1.5V AA
  • not included
  • Battery Life
  • >7 hours (alkaline)
  • Depending on battery type and use pattern
  • Dimensions
  • 254.8 mm (10.03″) long,
  • 50.0 mm (1.97″) diameter
  • Net Weight
  • 280 grams (9.9 oz)
  • without batteries
  • Accessory Included
  • AT8456a Quiet-Flex™ stand clamp

Based on 0 reviews

0.0 overall
0
0
0
0
0

Only logged in customers who have purchased this product may leave a review.

There are no reviews yet.

You may also like…