Behringer 962

Sequential Switch Module for Eurorack

Create the synthesizer of your dreams with the Behringer 962 Sequential Switch, an authentic reproduction of the circuitry from the Moog Modular 55 Series synthesizer, allowing you to build your very own unique synthesizer that can fit in a standard Eurorack case, for a very affordable price.

The 962 module is used as a latch, shifter, and signal selector that can alternate between two or three signal inputs. It also expands the 960 Sequential Controller into a 24-step Sequencer. The 962 includes a ribbon power cable and mounting screws.

How It Works

The 962 is used as a latch, shifter, and signal selector. Depending on the number of input jacks plugged into the module, the 962 can alternate between two or three signal inputs. It can also be used to expand the Behringer 960 Sequential Controller from an 8-step sequencer up to a 24-step sequencer.

Trigger Inputs and Outputs

The 962 Sequential Switch features 3-channel V-trig inputs for selecting CV input channels and separate V-trig outputs per channel. Triggers from other modules can be connected via 3.5mm cables and can be manually selected with the Trigger buttons.

Shifting Signals

Connect triggers in the Shift jack to activate the next stage in your sequence. You can create a 16 or 24-step sequence with the 962 by connecting it to the first stage output on a 960 Sequential Controller. This essentially expands the functionality of the 960 to create more complex and interesting sequences.

CV Inputs and Outputs

The SIG IN jacks are what allow the 962 to alternate between inputs. Connect an input signal to input 1 or 2 and the 962 will alternate between these two inputs. If all three inputs are used, then the module will automatically alternate between the three stages.

Eurorack Ready

Installing the 962 SEQUENTIAL SWITCH is simple to use; it was designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and screw in the module using the included screws. This allows for the 962 Sequential Switch to be mixed with other synth modules for a truly unique setup.

FEATURES

• Authentic reproduction of the discrete circuitry from the Modular 55 Series
• Artist roster includes world’s most famous pop, rock, and jazz musicians
• 2/3 CV signal in to 1-1 out, expands the 960 module into a 24 step sequencer
• 3 channel V-trig in for selecting CV input channel
• 3 separate buttons for manual channel selection
• Separate V-trig outputs per channel
• 3rd input channel enabled, if Sig In 3 used
• Horizontal Pitch: 8 HP
• Power: 25mA +12V, 20mA -12V
• Analog CV Multiplexer
• Inspired by Moog Modular 55
• 2/3 CV Signal In to 1-1 Out
• Expands 960 Module to 24-Step Sequencer
• Separate V-trig Outputs per Channel
• Includes Ribbon Power Cable
• Includes Mounting Screws