Electro-Voice EVERSE 8
- For Musicians, Mobile DJs, Rental Houses
- 8″ Woofer + 1″ Titanium Tweeter
- 100 x 100° Dispersion
- 65 Hz to 18 kHz Frequency Response
$1,199.00
Weatherized Battery-Powered Loudspeaker with Bluetooth Audio and Control (Black)
Designed for musicians, mobile DJs, and rental houses, the black Electro-Voice EVERSE 8 is a weatherized, battery-powered loudspeaker that features Bluetooth audio and control. With an IP43 rating, the EVERSE 8 is ready to play, rain or shine. The speaker provides 400W of power, doing so in a relatively lightweight, 16.8 lb package. With its 8″ woofer and 1″ titanium tweeter, the speaker delivers between 65 Hz to 18 kHz (-3 dB) at a maximum SPL of 121 dB.
On the rear, you’ll find a pair of combo XLR-1/4″ inputs for microphone or line-level signals as well as a 3.5mm aux input. A Bluetooth receiver allows you to stream audio from your favorite portable device. A free Bluetooth app provides wireless access to factory voicings, compression, EQ, and effects, allowing you to dial in your best sound from anywhere in the room. Pole-mount it into a subwoofer or speaker stand for a DJ set or lay it horizontal on the floor of a stage, where it can serve as a wedge for musicians as they perform. It also can be used as a kickback monitor for added versatility.
Replaceable Battery Pack with Long Run Time
The EVERSE 8 battery pack will provide +6 hours of constant music playback at maximum output levels or over 12+ hours 95 dB SPL average. EVERSE 8 has integrated power-saving features to extend battery life when no signal is present. The 12 VDC jack on the EVERSE 8 speaker can be used to power a wireless microphone receiver like the Electro-Voice RE3 or R300.
Professional-Level Output with Electro-Voice Sound Quality
The EVERSE 8 features an 8″ woofer with SST port and a 1″ titanium dome tweeter, which produces over 121 dB SPL max and frequency response from 50 Hz to 20 kHz (-10 dB). The 100 x 100° waveguide ensures even coverage across all frequencies. Two additional monitor angles (30 and 55°) ensure the right coverage and position for any situation.
QuickSmart Mobile App and Electra-Voice’s Intuitive User Interface
The EVERSE 8 features Electro-Voice’s intuitive QuickSmart DSP with single encoder interface for simple and quick setup. EVERSE 8 can be paired via Bluetooth to a mobile device with the QuickSmart Mobile app installed to provide easy remote control of all audio functions. The QuickSmart Mobile app allows pairing and grouping of up to 6 speakers, in any combination, including EVERSE 8, ELX200 powered family, and the EVOLVE family.
High-Quality Stereo Bluetooth Streaming
The EVERSE 8 features Bluetooth streaming, using the AptX-I-ID codec for high-quality stereo audio streaming with compatible devices. Two EVERSE 8 speakers can be paired for True Wireless Stereo (TWS), streaming from a mobile device.
Powered by Dynacord with Built-In Digital Mixer
The EVERSE 8 features a built-in 4-channel mixer with FX, EQ, automatic feedback suppression and ducking functions. The mixer includes two XLR-1/4″ combo jacks, including 48V phantom power on input 1 (XLR) and Hi-Z compatibility on input 2 (TRS). The mixer also includes stereo Bluetooth, a 3.5mm aux input, and USB-C connector for charging your portable devices.
FEATURES
- For Musicians, Mobile DJs, Rental Houses
- 8″ Woofer + 1″ Titanium Tweeter
- 100 x 100° Dispersion
- 65 Hz to 18 kHz Frequency Response
- 400W Power Rating
- Combo XLR-1/4″ Inputs + 3.5mm Aux Input
- Lightweight at 16.8 lb
| Brands | Electro Voice |
|---|---|
| Product Type | PA Speakers |
| Speaker Configuration | 1x 2-Way Loudspeaker |
| Number of Input Channels | 3 (2 x Mono, 1 x Stereo) |
| Amplifier Power Rating | 400 W |
| HF Driver | 1x 1″ / 25.4 mm Titanium Dome Tweeter |
| LF Driver | 1x 8″ / 203.2 mm Woofer |
| Audio I/O | 2x Combo XLR-1/4″ 3-Pin Female Balanced/Unbalanced Mic/Line Input
1x 1/8″ / 3.5 mm TRS Female Line Input 1x 1/4″ TS Female Footswitch Input 1x XLR 3-Pin Male Balanced Mix Output |
| USB I/O | 1x USB-C (Device Charging) |
| Bluetooth | 5.0 |
Portable PA System
| Speaker Configuration | 1x 2-Way Loudspeaker |
| Number of Input Channels | 3 (2 x Mono, 1 x Stereo) |
| Amplifier Power Rating | 400 W |
Speakers
| Enclosure Type | Bass-Reflex |
| HF Driver | 1x 1″ / 25.4 mm Titanium Dome Tweeter |
| LF Driver | 1x 8″ / 203.2 mm Woofer |
| Magnet | HF Driver:
Neodymium LF Driver: Ferrite |
Signal Processing
| Crossover | 2.5 kHz |
| Input Pad | No |
| EQ | Yes |
| Semi-Parametric EQ | No |
| Effects | 17x Reverb
3x Delay 6x Chorus 5x Echo (Type Unspecified) |
| Filters | No |
| Dynamic Processing | Compression |
Performance
| Frequency Response | 65 Hz to 18 kHz -3 dB |
| Frequency Range | 50 Hz to 20 kHz -10 dB |
| Maximum SPL | 121 dB |
| Coverage Angle | 100° H x 100° V |
Connectivity
| Audio I/O | 2x Combo XLR-1/4″ 3-Pin Female Balanced/Unbalanced Mic/Line Input
1x 1/8″ / 3.5 mm TRS Female Line Input 1x 1/4″ TS Female Footswitch Input 1x XLR 3-Pin Male Balanced Mix Output |
| Phantom Power | +48 V (Switchable, Applied to Select Inputs) |
| USB I/O | 1x USB-C (Device Charging) |
| Network I/O | No |
| Wireless Connectivity | Bluetooth |
Wireless
| Bluetooth | 5.0 |
Power
| Battery Type | 1x Rechargeable Lithium-Ion |
| Approximate Battery Life | 12 Hours (Music)
6 Hours (Max Power) |
| Battery Charging Time | 4 Hours |
| AC Input Power | 100 to 240 VAC, 50 / 60 Hz |
| Power Supply Output | 12 VDC |
| Current Consumption | 0.8 A |
| AC Power I/O | 1x IEC |
Physical
| Transport Options | 1x Handle (Top) |
| Mounting | 1 x 1.4″ / 36 mm Pole Socket (Bottom) |
| Construction Material | Metal Grille, Polypropylene |
| Environmental Resistance | Dust/Water-Resistant (IP43) |
| Dimensions | 15.7 x 10.8 x 10.7″ / 400 x 275 x 272 mm |
| Weight | 16.8 lb / 7.6 kg |
Packaging Info
| Package Weight | 23.16 lb |
| Box Dimensions (LxWxH) | 18.9 x 14.7 x 14.5″ |
Based on 0 reviews
Only logged in customers who have purchased this product may leave a review.
There are no reviews yet.