Focusrite RedNet HD32R 1U

Hot

Focusrite RedNet HD32R 1U

$2,299.00

Brands::Focusrite
Brands

32×32 Pro Tools | HD I/O With Dual PSUs

RedNet HD32R is a 1U, 32×32 Pro Tools | HD™ interface for any Dante™ audio-over-IP network.

  • Description
  • Additional information
  • Features
  • Reviews (0)
  • Specifications

Description

32×32 Pro Tools | HD I/O With Dual PSUs

RedNet HD32R is a 1U, 32×32 Pro Tools | HD™ interface for any Dante™ audio-over-IP network. Featuring network and power supply redundancy, RedNet HD32R is the ideal choice for integrating your Pro Tools HD system into a Dante networked I/O environment in many critical-path applications, whether in Post Production, Broadcast, Live Sound or the Recording Studio.

A pair of DigiLink mini connectors allows RedNet HD32R to connect directly to any Pro Tools | HD system whether it’s Native, HDX or even a legacy TDM system. Multiple RedNet HD32R units can be on the same Pro Tools system up to the maximum I/O channel count of Pro Tools, and Loop Sync I/O allows seamless integration with other Pro Tools interfaces such as HD I/O and Sync HD I/O.

Additional information

Brands

Focusrite

Sub Categories

Audio Interfaces

  • 32x32 Pro Tools | HD I/O for Dante audio-over-IP networks
  • Primary and Expansion DigiLink mini connections
  • Up to 24-bit, 192kHz sampling rates
  • AES67 compliant
  • Dual power supplies and network connections with full power and network redundancy including locking connectors for maximum reliability
  • Word Clock and Loop Sync I/O for increased flexibility and integration with other Pro Tools | HD hardware
  • Comprehensive remote control and remote signal metering through RedNet Control

Reviews

There are no reviews yet.


Be the first to review “Focusrite RedNet HD32R 1U”

DIGITAL PERFORMANCE

Supported Sample Rates

44.1 / 48 / 88.2 / 96 / 176.4 / 192 kHz (-4 / -0.1 / 0.1 / 4.167) at 24 bit

Clock Sources

Internal, Word Clock, Loop Sync (master or slave) or from Dante Network Master

External Word Clock Range

Nominal sample rate ±7.5

REAR PANEL CONNECTIVITY

Primary Port

1 x Mini DigiLink

Expansion Port

1 x Mini DigiLink

Word Clock Input

1 x BNC 75O port (switchable termination)

Word Clock Output

1 x BNC 75O port

PSU

2 x IEC Inputs with retaining clips

Network

2 x etherCON NE8FBH-S, also compatible with standard RJ45 connectors

FRONT PANEL INDICATORS

Primary PSU (A)

Green LED. Illuminates when an AC input is applied and all DC outputs are present

Primary PSU (B)

Green LED. Illuminates when an AC input is applied and all DC outputs are present

Primary Network

Green LED. Indicates that a network connection is present on primary port when in redundant mode

Secondary Network

Green LED. Indicates that a network connection is present on secondary port when in redundant mode

Network Locked

Green LED. When unit is network slave, shows valid network lock. When unit is network master

Sample Rate

Orange LED for each: 44.1 kHz, 48 kHz, x2, x4

Pull Up/Down

Orange LED. Indicates unit is set to operate on a Dante pull up/down domain

Signal Indicators

16 Green LEDs, 8 input/8 output indicators. Illuminate @ -126dBFS

Clock Source

Orange LED for each: Internal, Word Clock, Loop Sync and DAW Master

NETWORK MODES

Redundant

Allows unit to connect two independent networks

Switched

Connects both ports to integrated network switch allowing daisy-chaining of device

DIMENSIONS

Height

44.5mm/ 1.75"

Width

482.6mm/ 19"

Depth

263mm/ 10.35"

WEIGHT

Weight

3.9kg

POWER

Power PSU

2 x Internal, 100-240V, 50/60Hz, consumption 30VA

HEAT PERFORMANCE

Operating Temperature

Operates at up to an ambient temperature of 50 degrees Celcius

You may also like…