,

Focusrite Scarlett OctoPre 8 Mic Pre with ADAT connectivity

Availability:

Out of stock


Brands: Focusrite
Brands
  • Eight 2nd-generation Scarlett mic preamps
  • Eight balanced line inputs
  • Focusrite A-D conversion up to sample rates of 192 kHz
  • Dual front-panel instrument inputs

$589.00

Out of stock

The Sound of Scarlett – and more of it

Scarlett OctoPre gives you eight additional inputs. It’s the ideal way to expand your Scarlett – or any other interface with an ADAT input.

Eight Scarlett 2nd Generation mic preamps

Scarlett OctoPre features eight 2nd Generation Scarlett mic inputs – balanced line inputs too – all running through Focusrite precision 24-bit conversion at up to 192 kHz resolution with 109dB dynamic range.

Dual front-panel instrument inputs

Two high-headroom instrument inputs will handle high output guitar pickups and are right there on the front panel for easy access.

Plenty of headroom.
Pads for the most extreme inputs

With high-headroom inputs and a pad on every channel, Scarlett OctoPre is ideal for tracking drums as well guitars, keyboards, vocals – and more.

Outputs for live or stand-alone use

Eight balanced line outputs, sourced directly from the inputs allow Scarlett OctoPre to be used in a live situation whilst capturing the recording via the digital ADAT output.

About ADAT

ADAT is a simple and easy way of expanding your analogue inputs. ADAT uses inexpensive “light-pipe” optical cables to carry up to eight channels of audio. Just connect the ADAT output on the OctoPre to the ADAT input on your interface, set your sample rate and clock source and you’re ready to go. ADAT input is available on many Focusrite and third-party interfaces.

Need D-A/Outputs as well as Inputs?
Compression?

If you need more inputs as well as more outputs check out the Scarlett OctoPre Dynamic – everything you see here, plus eight channels of pristine D-A conversion and analogue compression on every input. It might be just what you’re looking for.

FEATURES

  • Eight 2nd-generation Scarlett mic preamps
  • Eight balanced line inputs
  • Focusrite A-D conversion up to sample rates of 192 kHz
  • Dual front-panel instrument inputs
  • Pad on every channel for extra headroom – ideal for loud sources such as drums
  • Eight balanced line outputs, suitable for live use
  • Accurate 5-segment LED input metering
  • ADAT connectivity via optical cables
  • 48V phantom power available on every channel for condenser mics
  • Included software bundle (Focusrite Red 3 and Softube Time & Tone Bundle)
  • Digital clocking with Word Clock I/O

Supported Sample Rates

44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz

Microphone Inputs

Frequency Response

20Hz – 20kHz +0.5/-1.5dB

Dynamic Range

109 dB (A-Weighted)

THD+N

<0.001%

Noise EIN

-127 dBu

Maximum input level (without pad)

+8 dBu

Maximum input level (with pad)

+16 dBu

Gain Range

50 dB

Input Impedance

3 kΩ

Line Inputs

Frequency Response

20Hz – 20kHz +0.5/-1.5dB

Dynamic Range

109 dB (A-Weighted)

THD+N

<0.002%

Maximum input level

+22 dBu

Gain Range

50 dB

Input Impedance

49 kΩ

Instrument Inputs

Frequency Response

20Hz – 20kHz +0.5/-1.5dB

Dynamic Range

108 dB (A-Weighted)

THD+N

<0.01% Maximum input level +13 dBu Gain Range 50 dB Input Impedance 1 MΩ Line Outputs Maximum Output Level (0 dBFS) +16dBu @ 0dBFS, or >21dBu where ADAT output is not used

THD+N

<0.001%

Ouput Impedance

136 Ω (Balanced)

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Focusrite Scarlett OctoPre 8 Mic Pre with ADAT connectivity”

There are no reviews yet.

You may also like…