,

Kali Audio WS-6.2

Availability:

Out of stock
Brands: Kali Audio
Brands
  • 2 x 6.5″ High-Excursion Woofers
  • Class-D Amp, 400W RMS, 1000W Peak
  • 27 to 200 Hz Frequency Response
  • Compact Form Factor

$789.00

Out of stock

Offering a compact yet powerful subwoofer for any project studio or home entertainment system, the WS-6.2 from Kali Audio is a ported 400W RMS sub with a class-D amp and dual 6.5″ drivers for potent sound reproduction. The WS-6.2 supports stereo and multichannel setups, up to 5.1 systems in small rooms, and the smaller than typical form factor enables a greater variety of options for room placement.

The WS-6.2 sports a wide 27 to 200 Hz frequency response, effective for low-passed signals, LFE channels, or external crossovers, and onboard 80 or 120 Hz crossovers are available for use on a range of different speaker setups. Plenty of connection options are available, including combo XLR-1/4″ inputs, RCA inputs, and XLR outputs for full-range speakers, and this active subwoofer includes an AC power cord to get you started.

Dual 6.5″ Woofers
The WS-6.2 subwoofer uses two horizontally opposed 6.5″ woofers as its driver configuration. Not only does this allow for high output in a small form factor, it also eliminates net vibration, so the subwoofer will not scoot along the floor at high levels. Kali designed these woofers for high excursion, with 15mm travel from peak-to-peak.
Low-Noise Port Tube
Similar to the LP-Series studio monitors, the port tube on the WS-6.2 was designed to deliver all the benefits of a front-firing port tube, without any drawbacks associated with noise. This allows the WS-6.2 to have even lower bass extension, while delivering clean, tight, and punchy bass.
Footswitch Bypass
Turn off the subwoofer and listen to your mix through your full-range speakers, so you can hear how it will translate to systems that don’t have a sub. Footswitch sold separately; most music retailers sell a variety of 1/4″ footswitches that will work well.
Limiter Circuit
The WS-6.2 is equipped with a limiter circuit that will protect the speaker from unsafe operating levels. In other words, you don’t need to worry about blowing up the subwoofer by playing it too loud.
Small Form Factor
The MDF and vinyl enclosure of the WS-6.2 is less than half the volume of other subwoofers with similar output and bandwidth specs. This allows a variety of placement options that aren’t possible with a larger sub.
FEATURES
  • 2 x 6.5″ High-Excursion Woofers
  • Class-D Amp, 400W RMS, 1000W Peak
  • 27 to 200 Hz Frequency Response
  • Compact Form Factor
  • Ported MDF and Vinyl Enclosure
  • Limiter Circuit
  • Footswitched Bypass
  • 80, 120 Hz, or External Crossover
  • Stereo and Multichannel Support
  • Includes AC Power Cord
Categories: , Tags: ,
Brands

Kali Audio
Product Type

Studio Subwoofers
Speaker Size

4.5"
Monitor Type & Configuration Active Dual Subwoofer
Total Power Output 400 W RMS / 1000 W Peak
Subwoofer Drivers 2x 6.5″ / 16.5 cm Cone
Frequency Range 31.5 Hz to 180 Hz ± 3 dB
Audio I/O 2x Combo XLR-1/4″ TRS Balanced Input

1x Stereo 2RCA Unbalanced Input

1x 1/4″ TRS Balanced Input

2x XLR 3-Pin Balanced Output

Show More
Network I/O No
Wireless No
Number of Included Monitors Single Monitor
Enclosure Bass-Reflex/Ported
Total Power Output 400 W RMS / 1000 W Peak

Drivers

Subwoofer Drivers 2x 6.5″ / 16.5 cm Cone
Amplifiers Subwoofer: 400 W RMS / 1000 W Peak Class-D

Performance

Frequency Range 31.5 Hz to 180 Hz ± 3 dB
Frequency Response 27 Hz to 200 Hz ± 10 dB
Maximum Sound Pressure Level (SPL) 120 dB (Peak)
Dynamic Range 20 dB
Total Harmonic Distortion (THD) <2%
Protections and Limiting Limiter

Signal Processing

EQ No
Filters No
Parametric EQ No
Crossover Frequency High-Pass: 80 Hz

Low-Pass: 120 Hz
Phase Adjustment 0 / 180° Phase Inversion

Connectivity

Audio I/O 2x Combo XLR-1/4″ TRS Balanced Input

1x Stereo 2RCA Unbalanced Input

1x 1/4″ TRS Balanced Input

2x XLR 3-Pin Balanced Output
Network I/O No
USB No
Wireless No
Mobile App Compatible No

Power

AC Input Power 100 to 240 VAC, 50/60 Hz
Power Consumption 240 W (Maximum)

Physical

Color Black
Orientation Vertical
Enclosure Material MDF
Mounting Points No
Operating Humidity 65% (Recommended)
Certifications FCC, UKCA, CE, WEEE
Dimensions (W x H x D) 12.2 x 14.5 x 11″ / 31 x 36.8 x 27.9 cm
Weight 31.0 lb / 14.1 kg

Packaging Info

Package Weight 38.42 lb
Box Dimensions (LxWxH) 19.7 x 16.2 x 14.5″

Based on 0 reviews

0.0 overall
0
0
0
0
0

Only logged in customers who have purchased this product may leave a review.

There are no reviews yet.

You may also like…

Related products