,

Neumann KH 420


Brands: Neumann
Brands
  • 10″ Long Throw Woofer
  • 3″ Fabric Dome Midrange
  • 1″ Alloy Fabric Dome Tweeter
  • 295/130/130W Class AB Amplifiers

$4,469.00

3-Way Midfield Monitor

The KH 420 from Neumann is a three-way active monitor designed for use as a mid-field or main monitor, and can be used free-standing or flush mounted into a wall. It is particularly well-suited for use in music, broadcast, and post production studios for tracking, mixing and mastering, and in multi-channel systems can be mixed freely with other loudspeakers in the range.

In-house computer optimized drivers, a waveguide featuring Mathematically Modeled Dispersion (MMD), flexible acoustical controls, various input options and an extensive mounting hardware range allow the KH 420 to be used in diverse acoustical conditions, with any source equipment, and in a wide variety of physical locations.

Computer mechanically modeled three-way cabinet design using Low Resonance Integral Molding (LRIM) materials

In-house simulated magnetically shielded drivers

Alloy fabric dome tweeter with built-in grille

Fabric dome, neodymium magnet, midrange driver

Long throw bass driver with Extremely Linear Force Factor (ELFF) and flow optimized die cast basket

High-capacity flow-optimized bass reflex ports with pipe damped

Elliptical Mathematically Modeled Dispersion (MMD) waveguide, with wide horizontal and narrow vertical dispersion

Electronics panel with dimensioned integrated Accelerated Heat Tunneling (AHT) heat sink

Analog class AB amplifiers with large headroom and overheat limiting

Fast-acting independent thermo limiters for woofer, midrange dome and tweeter to protect the voice coils

Woofer soft clip and excursion limiters

Four-position bass, low-mid and treble acoustical controls and easy to use parametric equalizer

Wide range input gain and output level controls

Ground lift

Individual hand-alignment in final test

Fully documented extensive mounting hardware options (hardware sold separately)

FEATURES

  • 10″ Long Throw Woofer
  • 3″ Fabric Dome Midrange
  • 1″ Alloy Fabric Dome Tweeter
  • 295/130/130W Class AB Amplifiers
  • Flow-Optimized Bass Reflex Ports
  • Elliptical Math Modeled Dispersion
  • Fast-Acting Independent Thermo Limiters
  • Acoustical Controls and Parametric EQ
  • Ground Lift
  • Magnetically Shielded
Brands

Neumann

Speaker Size

10"

Product Type

Studio Subwoofers

Color

Black

Monitor Type & Configuration Active 3-Way
Total Power Output 555 W RMS / 610 W Peak
Tweeter 1x 1″ / 25.4 mm Dome
Midrange 1x 3″ / 7.6 cm Cone
Woofer 1x 10″ / 26.5 cm Cone
Frequency Range 26 Hz to 22 kHz ± 3 dB
Audio I/O 1x XLR 3-Pin Balanced Input
Digital Audio I/O No
Network I/O No
Wireless No
Number of Included Monitors Single Monitor
Enclosure Bass-Reflex/Ported, Shielded
Total Power Output 555 W RMS / 610 W Peak

Drivers

Tweeter 1x 1″ / 25.4 mm Dome
Midrange 1x 3″ / 7.6 cm Cone
Woofer 1x 10″ / 26.5 cm Cone
Amplifiers HF: 130 W / 140 W Peak Class-AB

MF: 130 W / 140 W Peak Class-AB

LF: 295 W / 330 W Peak Class-AB

Performance

Frequency Range 26 Hz to 22 kHz ± 3 dB
Frequency Response 28 Hz to 20 kHz ± 2 dB
Maximum Sound Pressure Level (SPL) 122.4 dB
Total Harmonic Distortion (THD) 0.5%
Analog Input Sensitivity/Gain +4 to -12 dB (Continuously Variable)
Self-Generated Noise Less Than 20 dBA (at 3.93″ / 10 cm)
Protections and Limiting Excursion Limiter, Peak Limiter, and Thermal Limiting

Signal Processing

EQ 1x LF Shelf: -7.5 to 0 dB (2.5 dB Increments)

1x Mid Notch/Peak: -4.5 to 0 dB (1.5 dB Increments)

1x HF Shelf: -2 to +1 dB (1 dB Increments)

Parametric EQ -12 to +4 dB Between 25Hz and 80Hz, Q: 1 to 8

-12 to +4 dB Between 50Hz and 160Hz, Q: 1 to 8

-12 to +4 dB Between 100Hz and 320Hz, Q: 1 to 8

Crossover Frequency Low-Pass: 570 Hz, 24 dB/Octave Slope

High-Pass: 2 kHz, 24 dB/Octave Slope

Connectivity

Audio I/O 1x XLR 3-Pin Balanced Input
Digital Audio I/O No
Network I/O No
USB No
Wireless No

Power

AC Input Power 100 to 240 VAC, 50/60 Hz
Power Consumption 60 W (Standby)

800 W (Maximum)

Physical

Color Black
Monitor Orientation Vertical
Enclosure Material Aluminum, Metal Grille, Wood
Mounting Points 8x M5 (Rear Panel)
Operating Temperature 50 to 104°F / 10 to 40°C
Operating Humidity 90%
Storage Temperature -13 to 158°F / -25 to 70°C
Dimensions (W x H x D) 13 x 25.4 x 17.5″ / 330 x 645 x 444 mm
Weight 77.2 lb / 35.0 kg

Packaging Info

Package Weight 90 lb
Box Dimensions (LxWxH) 30.2 x 24.25 x 23.4″

Based on 0 reviews

0.0 overall
0
0
0
0
0

Only logged in customers who have purchased this product may leave a review.

There are no reviews yet.

You may also like…