, ,

Neumann KH870 II


Brands: Neumann
Brands
  • 7.1.4 Bass Management for Immersive
  • Dual 10″ Front-Firing Drivers
  • Extended Bass Response to 16 Hz
  • DSP Control for Clarity and Precision

$8,849.00

Dual 10″ Active Studio Subwoofer

The Neumann KH 870 II redefines professional low-frequency monitoring, taking its place as the flagship of Neumann’s subwoofer range. With twice the output of the KH 810 II, the KH 870 II is engineered for large rooms where maximum headroom and precision are essential. Featuring the same 7.1.4 Bass Manager found in the KH 810 II, it is an ideal solution for multichannel and immersive formats, offering seamless integration with all KH Line studio monitors—including large systems like the KH 420. For music, broadcast, and postproduction facilities, the KH 870 II delivers the headroom, accuracy, and clarity needed to keep your monitoring uncompromised.
Dual 10″ Drivers, Extended Bass
The KH 870 II houses two front-firing 10″ drivers in a robust enclosure, delivering bass extension down to 16 Hz with high SPL capability. Compared to the KH 810, its dual-driver design provides significantly more output, allowing your main loudspeakers to play at higher levels with lower distortion. Carefully engineered front bass ports reduce turbulence and allow flexible placement near walls or flush-mounted installations without compromising performance.
Advanced DSP and Room Correction
The KH 870 II subwoofer integrates an advanced DSP engine for precise system alignment, offering clarity and consistency in any setup. In addition, it is fully compatible with MA 1 Automatic Monitor Alignment (sold separately), providing professional-grade room correction not only for the subwoofer itself, but also for connected analog KH Line monitors. This ensures that both stereo and immersive systems benefit from digital precision across the entire monitoring chain.
Flexible Bass Management and Immersive Integration
The subwoofer features a Flexible Bass Manager that integrates seamlessly into monitoring systems of all sizes. Acting as a signal hub for up to 7.1.4 systems, it supports surround and immersive formats with exceptional accuracy. Multiple acoustic controls, system volume management, and comprehensive connectivity options make it easy to integrate into both new and existing monitoring environments. For large-scale facilities or immersive studios, the KH 870 II provides the headroom and scalability required for today’s advanced workflows.
Rugged Design, Professional Workflow
Featuring a cabinet built from a rigid, resonance-controlled enclosure with a durable painted finish and isolation feet, the KH 870 II has been engineered to last. Its low-heat, high-efficiency amplifiers deliver up to 400W of power while maintaining reliability over long sessions. An integrated electronic limiter ensures long-term protection for both drivers and amplifiers. With options for daisy-chaining, sum outputs, and advanced acoustic control, it adapts easily to any environment.
 FEATURES
  • 7.1.4 Bass Management for Immersive
  • Dual 10″ Front-Firing Drivers
  • Extended Bass Response to 16 Hz
  • DSP Control for Clarity and Precision
  • MA 1 Room Correction Compatibility
  • Daisy-Chain and Sum Output Options
  • Flexible Acoustic and System Controls
  • Integrated Electronic Limiter
  • Seamless with All KH Line Monitors
Brands

Neumann

Speaker Size

10"

Product Type

Studio Subwoofers

Monitor Type & Configuration
Active Dual Subwoofer
Subwoofer Drivers
2x 10″ / 25.4 cm Cone
Frequency Range
16 Hz to 750 Hz
Audio I/O
2x XLR 3-Pin Balanced Input
2x DB-25 Input
2x XLR 3-Pin Balanced Output
2x DB-25 Output

Digital Audio I/O
7x AES-3id Output
Network I/O
No
Wireless
No
Monitor Type & Configuration
Active Dual Subwoofer
Number of Included Monitors
Single Monitor
Enclosure
Bass-Reflex/Ported, Shielded
Drivers
Subwoofer
2x 10″ / 25.4 cm Cone
Performance
Frequency Range
16 Hz to 750 Hz
Frequency Response
16 Hz to 750 Hz
Maximum Sound Pressure Level (SPL)
115 dB
Protections and Limiting
Peak Limiter and Thermal Limiting
Connectivity
Audio I/O
2x XLR 3-Pin Balanced Input
2x DB-25 Input
2x XLR 3-Pin Balanced Output
2x DB-25 Output
Digital Audio I/O
7x BNC Coaxial AES-3id Output
Network I/O
No
USB
No
Wireless
No
Mobile App Compatible
No
Physical
Color
Black
Monitor Orientation
Vertical
Enclosure Material
Metal Grille, Wood
Dimensions (W x H x D)
13 x 29 x 25.4″ / 330 x 737 x 645 mm
Packaging Info
Package Weight
114.9 lb
Box Dimensions (LxWxH)
33.25 x 29.5 x 17.75″

Based on 0 reviews

0.0 overall
0
0
0
0
0

Only logged in customers who have purchased this product may leave a review.

There are no reviews yet.

You may also like…