, ,

QSC K10


Brands: QSC
Brands
  • 10-inch Woofer; 1.75-inch diaphragm compression driver
  • 90° conical DMT coverage
  • Maximum SPL 129 dB peak
  • Attractive and professional appearance

 

The QSC K10 punches above its weight class with unrivaled sound quality and solid workmanship that stands up to the rigors of professional use. Even more impressive is you get all this in a remarkably compact, lightweight and stylish enclosure for effortless handling and set up.  Under the hood you’ll find an efficient Class D power module that pumps out 1000 watts of clean, distortion-free sound with crisp highs and deep, rich lows.

With 90 degrees of coverage, the K10’s woofer drives low frequencies down to 56Hz making it ideal for a wide range of applications including DJing or live reinforcement of instruments, especially in smaller venues. Paired with a K Series subwoofer there’s not much this speaker can’t handle. Equally comfortable as a stage monitor, the K10 enclosure has an angled side for use as a low-profile, horizontal wedge and a flat side for proper side-fill use.

Processing Technology
QSC incorporates several proprietary DSP technologies into the K10, including Digital Extension and Excursion Processing (DEEP). DEEP allows K10 to deliver levels of low-frequency extension previously impossible in enclosures of this size. Another innovation is Intrinsic Correction, which uses dozens of spatially-averaged measurements mapped to the processor to deliver smooth and accurate reproduction across the entire sound field. Preventing amplifier clipping or overload is QSC’s proprietary GuardRail technology, which monitors the input voltage and controls the amplifier output stage before the onset of clipping.

Connectivity & Monitoring
The back of the K10 features two XLR-combi inputs, each with its own level control. Both accommodate line-level inputs and one may be switched to microphone level sensitivity. Phono (RCA) input jacks are also included for connection of consumer electronics sources. Dual XLR outputs are provided for dual “loop-thru” XLR/M connectors and a single XLR jack is available as a summed output. All three input sources may be used at once and mixed via the two gain control knobs. In addition, user EQ controls are provided to select between different subwoofer settings. For installed applications, connecting a commonly available potentiometer to the unit’s Euroblock connector allows the operator to have gain control from a remote location. Multiple K Series units can be daisy-chained together to one centralized control.

Suspension and Mounting
The K10 may be pole-mounted, suspended, or yoke-mounted. The K10 yoke accessory kit (not included) allows for either horizontal or vertical yoke mounting, providing a flexible means of attaching K Series loudspeakers to a building structure or truss. When suspended deployment is required, M10 threaded inserts support vertical or horizontal suspension, while the integral polemount socket accommodates 35 mm speaker poles for use on a speaker stand or over a sub. The pole socket is designed so that the speaker may be angled down 7.5 degrees in order to cover the audience while keeping acoustic energy off reflective walls and ceilings.

FEATURES

  • 10-inch Woofer; 1.75-inch diaphragm compression driver
  • 90° conical DMT coverage
  • Maximum SPL 129 dB peak
  • Attractive and professional appearance
  • Rugged ABS enclosures
  • 16-gauge powder coated steel grille
  • 1000-watt continuous Class D power modules in all models
  • Functions as a monitor wedge
  • Comfortable ergonomic handles
  • 35 mm pole sockets with Tilt-Direct™
  • M10 rigging points
  • Eyebolt and yoke mount accessories available
  • Onboard mixer with two combo XLR and ¼⁻ᶦⁿᶜʰ inputs, and stereo RCA inputs, (three audio input sources); two direct channel outputs and single summed balanced output
  • Extensive DSP enhances system performance:
    • DMT™ (Directivity Matched Transition) provides for matched LF and HF coverage across the entire listening area, eliminating unnatural “dead” or “hot” frequency zones.
    • Intrinsic Correction™, first featured in our high-end line-array products maps 65–75 spatially-averaged measurements to IIR and FIR filters that actively adjust time, frequency and amplitude response to a maximally flat band pass target. The result is a speaker that behaves equally well across the entire sound field.
    • DEEP™ and excursion limiting allow for extended low-frequency response by actively managing low-frequency transients without degradation of the underlying signal or adjacent frequencies.
    • GuardRail™ protection protects both the amplifier module and your performance from unnatural and destructive clipping.
Brands

QSC

Size

10"

Product Type

PA Speakers

Configuration Multipurpose 2-way
TransducersLow-frequency

High-frequency

10-inch cone transducer1.75-inch diaphragm compression driver
Frequency Response (-6 dB) 60 Hz – 18 kHz
Frequency Range (-10 dB) 56 Hz – 20 kHz
Nominal Coverage (-6 dB) 90° conical DMT
Maximum SPL1 129 dB peak
Amplifiers
Power Output2 1000 W continuous Class D(500 W LF, 500 W HF)

2000 W peak

Input Impedance XLR / ¼⁻ᶦⁿᶜʰ: 40 kΩ balanced / 20 kΩ unbalancedXLR / ¼⁻ᶦⁿᶜʰ MIC mode: 2260Ω balanced

RCA: 10 kΩ

Controls Power, Gain A, Gain B, Mic/Line, LF Mode (Ext Sub/Norm/DEEP™), HF Mode (Flat/Vocal Boost), Front LED (On/Off/Limit)
Indicators Power, Signal A, Signal B, Standby, Limit, Mic
Connectors Balanced female XLR/¼⁻ᶦⁿᶜʰ line/mic level input, Balanced female XLR/¼⁻ᶦⁿᶜʰ line level input, Dual Balanced male XLR full range line level out , Balanced male XLR “mix” out, Stereo RCA line level input, Remote gain control, Locking IEC power connector
Cooling On demand, 50 mm variable speed fan
Amplifier Protection Thermal limiting, output overcurrent, overtemperature muting, GuardRail™
Transducer Protection Thermal limiting, excursion limiting
AC Power Input Universal power supply 100–240 VAC, 50 to 60 Hz
AC Power Consumption(1/8 of full power) 100 VAC, 2.3 A120 VAC, 2.01 A

230 VAC, 1.13 A

Enclosure
Material Impact resistant ABS
Finish Black paint
Grille Rugged powder-coated steel
Dimensions (HWD) inches 20.4 × 12.6 × 11.8
Dimensions (HWD) mm 519 x 320 x 300
Weight (Net) 32 lb / 14.5 kg

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “QSC K10”

There are no reviews yet.

You may also like…