Rode NT2-A

Large-Diaphragm Multipattern Condenser Microphone

Combining a true condenser capsule, three selectable polar patterns, and ultralow-noise circuitry, the Rode NT2-A large-diaphragm studio microphone offers a clear and smooth sonic signature along with versatile pickup responses, making it ideal for all sorts of voice and instrument sources at home or in the studio. Plus, its bundle of accessories—shockmount, pop filter, XLR cable, and dust cover—help the NT2-A serve vocalists, rappers, and voice-over artists especially well.

With low noise being a top priority of the NT2-A, its 1″ gold-sputtered capsule is internally shock-mounted to further isolate it from handling and vibration noise. Enhancing its professional character are the onboard pad (-5 or -10 dB) and high-pass filter (40 or 80 Hz) settings, which help avoid distortion and bass builup. Since it can run on 24 or 48 VDC phantom power, the NT2-A can be used with a variety of professional and entry-level XLR mic preamps.

Large-Diaphragm True Condenser

This true condenser (externally biased) features a 1″ gold-sputtered diaphragm that provides a broad frequency response, wide dynamic range, and excellent signal-to-noise ratio.

Three Polar Patterns

With three polar patterns selectable on the mic, the NT2-A offers excellent versatility for single-source close miking (cardioid recommended), dual-source pickup (figure-8 recommended), and room ambience capture (omnidirectional recommended).

Special Voicing

The frequency and transient response of this transducer has been voiced to complement today’s recording techniques, and yet still evoke the silky smooth character of the legendary microphones of the ’50s and ’60s.

Transformerless Output

The transformerless JFET output electronics result in an ultralow-noise output (just 7 dBA) while maintaining maximum signal gain.

48V Phantom Power

The NT2-A operates reliably on 24 or 48 VDC phantom power, which can be supplied via most XLR-connected mic preamps, mixer channels, or audio interfaces.

Accessory Package

The accessory package includes a studio-grade shockmount with an integrated pop filter, a premium 20′ XLR mic cable, a dust cover, and a downloadable instructional video packed with recording tips.

FEATURES

• True condenser (externally biased)
• Large 1″ HF1 capsule with gold-sputtered diaphragm
• Cardioid, figure-8, and omnidirectional polar patterns
• Self-noise of only 7 dBA
• Transformerless JFET active circuitry
• Wide dynamic range
• XLR 3-pin output connector
• Runs on phantom power
• Internally shock-mounted capsule
• Includes SM6 shockmount, pop filter, and dust cover
• For Vocals and Instruments
• Pad Switch at -5 or -10 dB
• High-Pass Filter at 40 or 80 Hz
• Shockmount Inhibits Vibration Noise
• Large 1″ Gold-Sputtered Diaphragm
• Transformerless Output Stage
• Pop Filter Controls Vocal Plosives
• XLR Cable for Hookup to Mic Preamp
• Operates on 24 or 48 VDC Phantom Power