Shure SLXD4Q+ Quad

Availability:

Out of stock


Brands: Shure
Brands
  • For Small to Medium Venues & Events
  • Quad-Channel, Single-Rack Space
  • Wide 138 MHz Tuning Range
  • Two RJ45 Ethernet Connections

$3,899.00

Out of stock

Quad-Channel Digital Wireless Receiver (G57: 460 to 608 MHz)

The Shure SLXD4Q+ is a quad-channel digital wireless receiver compatible with all SLX-D transmitters and housed in a rugged, single-rack chassis with Ethernet networking capabilities and two removable antennas. It is ideally suited for rack mounting in portable flight cases and long-term installations for small- to medium-sized venues, event spaces, conference rooms, houses of worship, and education facilities.

The system delivers crystal-clear, 24-bit digital audio with a wide dynamic range for natural vocal reproduction to presenters, vocalists, clergy, lecturers, and performers. It operates in the UHF band and uses Digital Predictive Switching Diversity technology to protect the transmission from interference and deliver a solid, reliable RF signal without dropouts.

The all-metal rackmount SLXD4Q+ receiver offers intuitive LCD interfaces with meters for RF and audio output. It also offers 60 dB of output gain control, and both mic/line XLR and 1/4″ instrument outputs for each channel. Additional features include automatic frequency scanning and IR sync to easily link the transmitter (available separately) and receiver to the same frequency.

You can run up to 32 mics simultaneously in the same space. RF cascading allows you to easily create an 8-channel receiver system simply by connecting two SLX-D Quad receivers. Dual RJ45 ports provide local Ethernet connections for remote control via Shure’s Wireless Workbench control software.

Transparent Digital Sound, Dependable Performance, and More Mics

  • The SLX-D delivers 24-bit digital audio with a fast transient response and over 118 dB of dynamic range—resulting in clear, accurate sound.
  • The system operates in the G57: 470 to 608 MHz UHF band with a 138 MHz tuning range and 5520 selectable frequencies, far away from potential Wi-Fi interference in the 2.4 GHz band.
  • Digital Predictive Switching Diversity uses a microprocessor to switch between the two antennas for the cleanest signal—before dropouts occur.
  • Low latency makes the system ideal for applications that require live sound reinforcement.
  • Spectrum-efficient digital transmission technology allows for up to 32 mics to be used at once.
  • Up to 10 compatible systems per 6 MHz TV band and 12 systems per 8 MHz band are supported.
  • Ethernet networking saves you time with coordinated group scanning between multiple receivers from a single location; TCPI command streams from third-party companies such as AMX and Crestron are also supported.

Ready to Rackmount, Easy to Use

  • With 4 receivers housed in a tough, single-rack metal chassis with detachable antennas, the SLXD4QDAN+ receiver is a great fit for A/V installations or as part of a portable rackmount rig—ready to travel to a meeting or event.
  • The SLX-D is engineered to provide outstanding sound for small- to medium-sized spaces and facilities—without costly, complicated features required primarily for large venues.
  • Intuitive front-panel controls and a high-contrast LCD screen with audio and RF meters makes set up a snap.
  • The auto-scan function automatically seeks out the cleanest available frequency for you. The receiver and transmitter then easily link to the same frequency via infrared.
  • The receiver offers up to 60 dB of adjustable gain, and the display shows you where the ideal level should be.

Audio Summing

Manage the number of output signals from the SLX-D Quad receiver

  • Determine number of available mixer channels
  • Set audio output levels on the SLX-D Quad receiver
  • Match number of audio outputs to open mixer channels
  • Sum channel outputs as necessary:
    • 1, 2, 3, 4 = 4 outputs
    • 1+2, 3, 4 = 3 outputs
    • 1, 2, 3+4 = 3 outputs
    • 1+2, 3+4 = 2 outputs
    • 1+2+3+4 = 1 output

Enhance and Expand

  • Adding UA874 active antennas or PA805SWB passive antennas increases the range of your system and offers increased protection against interference.
  • SLX-D Quad receivers feature bias voltage, allowing you to connect UA874 Active Directional Antennas without additional power supplies needed.
  • The UA844+SWB antenna distribution system (available separately) lets you stretch the power of your antenna pairs, giving you more on-air channels in less setup time.
  • Use the RF cascade outs to connect two SLX-D Quad receivers together for a powerful and compact 8-channel wireless system that takes up only two rack spaces and offers reliable frequency coordination across all 8 channels with streamlined monitoring and centralized control.

FEATURES

  • For Small to Medium Venues & Events
  • Quad-Channel, Single-Rack Space
  • Wide 138 MHz Tuning Range
  • Two RJ45 Ethernet Connections
  • Two Removable Antennas, RF Cascading
  • Digital Predictive Diversity Reception
  • Adjustable Output Level, Audio Summing
  • High-Contrast LCD
  • Rugged Metal Construction
  • Expandable to 32 Mic Channels/330′ Range
Brands

Shure

Product Type

Wireless Receivers

Wireless Technology Digital UHF
Diversity Yes, True Diversity
Max Operating Range 328′ / 100 m
Receiver Type 1x Tabletop/Rack-Mountable
Number of Audio Channels 4

System

Wireless Technology Digital UHF
Diversity Yes, True Diversity
RF Frequency Band 470 to 608 MHz
Number of RF Channel Frequencies 5520
Max Operating Range 328′ / 100 m
Max Transmitters per Band 32
Latency 3.2 ms
Built-In Recorder No
Timecode Support No
Mobile App Compatible Yes: Android & iOS

Receiver

Receiver Type 1x Tabletop/Rack-Mountable
Mounting Options Rackmount (with Included Hardware, 1 RU)
Antenna 2x Detachable BNC 1/4 Wave External (Rear-Mount)
Number of Audio Channels 4
Audio I/O 4x XLR 3-Pin Balanced Mic/Line Output 

4x 1/4″ TRS Balanced Output

Network I/O 2x RJ45
USB/Lightning Connectivity No
USB Class-Compliant No USB Connectivity
Gain Range 18 to +42 dB (1 dB Steps)
Frequency Response 20 Hz to 20 kHz +1/-2 dB (Dependent on Mic)
Built-In Microphone No
Display LCD (Non-Backlit)
Power Requirements AC/DC Power Adapter

Power

AC/DC Power Adapter 15 VDC at 0.9 A, Center-Positive (Included)
Input Power 100 to 240 VAC, 50 / 60 Hz

Physical

Environmental Resistance No
Rackmount Size 1 RU (Full Rack)
Housing Metal

Packaging Info

Package Weight 8.72 lb
Box Dimensions (LxWxH) 18.2 x 14.4 x 4.5″

Based on 0 reviews

0.0 overall
0
0
0
0
0

Only logged in customers who have purchased this product may leave a review.

There are no reviews yet.

You may also like…