, ,

Solid State Logic Alpha VHD Pre


Brands
  • Ultra-clean SSL preamp with 75dB of gain
  • 48V phantom power
  • 20dB Pad switches that illuminate to indicate overload
  • Hi Z switches to accommodate mic, line and instrument level signals

$2,785.00

Four-Channel Mic Pre with attitude.

Change your expectations of what a preamp should be.

The Alpha VHD-Pre offers four of SSL’s widely acclaimed VHD Pre circuits in compact 1U format. First featured on our flagship Duality console and now the go to circuit for leading engineers worldwide, the VHD Pre is a patented SSL preamp design that can deliver ultra-clean SSL grade recordings but also features a patented ‘Variable Harmonic Drive’ circuit which can be switched into the signal path. The Variable Harmonic Drive circuit uses a 100% analogue signal path to generate rich harmonic distortion. As you increase the input gain, the Variable Harmonic Drive circuit introduces either 2nd or 3rd harmonic distortion or a blend of the two to your source material. At lower gain settings it adds gentle valve-style warmth or a touch of transistor edge. As the gain is increased the more extreme the distortion becomes until at high gain settings it delivers fierce trashy transistoresque grunge. VHD pre’s give the user ultimate versatility from a studio grade preamp. Whether it’s ultra-clean traditional SSL, subtle warming or totally trashy transistor distortion. VHD delivers a uniquely versatile pallette of rich analogue character that can be applied as a mic pre, instrument DI or line level processing device.

Each Pre is a simple analogue device with XLR in/out on the back, an instrument level 1/4″ jack on the front panel. Each circuit has a Hi Z switch to accommodate mic, line and instrument level signals, a PAD switch to facilitate use as a line level processing device and 48v phantom power switch. There are three rotary controls: Input Level, VHD and Output Level.

FEATURES

  • Ultra-clean SSL preamp with 75dB of gain
  • 48V phantom power
  • 20dB Pad switches that illuminate to indicate overload
  • Hi Z switches to accommodate mic, line and instrument level signals
  • Four independent Variable Harmonic Drive systems
  • Front panel 1/4″ jack instrument/line level inputs with passive DI type impedance detection and level matching
  • Individual input, output and VHD controls for each section
  • Rear panel XLR mic/line inputs and XLR outputs
Number of Channels 4
Inputs 4 x XLR 3-pin female (balanced)

4 x 1/4″ TS Hi-Z (unbalanced)

Outputs 4 x XLR 3-pin male (balanced)
Phantom Power 48 VDC
Gain Range Input: +20 to +75 dB

Output: ±20 dB

Specialties VHD (Variable Harmonic Drive) circuit per channel

-20 dB pad per channel

Maximum Input Level 0 dBu (+20 dBu with pad)
Maximum Output Level +24 dBu
Input Impedance XLR Lo-Z: 1 kOhm

XLR Hi-Z: 10 kOhms

1/4″ Hi-Z: 1 MOhm

Output Impedance 40 Ohms
Frequency Response Not specified by manufacturer
Noise Not specified by manufacturer
Operating Temperature 41 to 86°F / 5 to 30°C
Non-Operating Temperature -4 to 122°F / -20 to 50°C
Temperature Gradient (max) 59°F / 15°C per hour
Operating Humidity 20 to 80%
Non-Operating Humidity 5 to 90%
Max Wet Bulb 84°F / 29°C non-condensing
Operating Vibration < 0.2 G (3 to 100 Hz)
Non-Operating Vibration < 0.4 G (3 to 100 Hz), power off
Operating Shock < 2 G (10 ms maximum)
Non-Operating Shock < 10 G (10 ms maximum)
Operating Altitude 0 to 9842.5′ / 0 to 3000 m
Non-Operating Altitude 0 to 39,370.1′ / 0 to 12,000 m
Power Consumption < 20 W
Power Requirement At VHD-Pre: +5 VDC (± 15 VDC) via 5-pin 180° DIN connector

At Power Adapter: 100 to 240 VAC, 50 to 60 Hz via IEC320 3-pin connector

Dimensions (W x D x H) 19.0 x 9.1 x 1.8″ / 48.2 x 23.0 x 4.5 cm (including rack ears, casing only)

17.2 x 9.1 x 1.8″ / 43.8 x 23.0 x 4.5 cm (excluding rack ears, casing only)

Weight 6 lb / 2.6 kg

Based on 0 reviews

0.0 overall
0
0
0
0
0

Only logged in customers who have purchased this product may leave a review.

There are no reviews yet.

You may also like…