, ,

Solid State Logic X Rack E-Series EQ Module XR425


Brands
  • Single Channel
  • Compressor/Limiter
  • Expander/Gate
  • Sidechain Input

$1,550.00

The SSL XLogic X-Rack XR425 E Series Dynamics Module gives you the compressor/limiter and expander/gate from the legendary SSL 4000 E Series, in an X-Rack format.

By sticking to the original 611E design, the E-Series Dynamics module faithfully reproduces the channel strip from the famous SSL desk, using their SuperAnalogue circuitry to replicate the Class A characteristics for clean, quiet, efficient operation.

Compressor characteristics can be switched between Hard and Soft Knee operation while fast attack times can be accessed in both sections. A Key input allows you to trigger the gate with an external sound source. A chance to own, and use, this piece of audio history in a compact and contemporary form gives the X-Rack Dynamics Module even more appeal for operators of smaller studios.

Forget trying to get a 4000 E desk through your door, instead just pop a pair of these classic X-Rack E series channel-strip compressor/gates into your X-Rack or Mynx chassis and you are set to take on the world.

Don’t forget that Total Recall is also available as standard on all X-Rack modules!

SSL XLogic X-Rack E Series Dynamics Module Overview

  • Immortal SSL 4000 Series circuitry
  • Class A VCA replication
  • Expander/gate with Key input
  • Based on classic 611E console channel strip.
  • Total Recall
  • Dimensions (DxHxW): 200mm / 7.9 inches (including front panel knobs, excluding connectors) x 171mm / 6.75 inches x 49mm / 1.9 inches – overall width (front and rear panels are offset)
Function Compressor/Limiter Expander/Gate
Number of Channels Single
Inputs 1 x XLR
1 x XLR sidechain
Outputs 1 x XLR
Maximum Input Level Not specified by manufacturer
Compression Threshold +10dB to -30dB, variable
Compression Ratio 1:Infinity, variable
Attack Time 30mSec per 20dB, switchable to 3mSec (“Fast Att”)
Release Time 0.1Sec to 4Sec, variable
Gate Threshold -30dB to +10dB, variable
Gate Rate Attack: 1.5mSec per 40dB, switchable to 100µSec
Release: 0.1Sec to 4Sec, variable
Maximum Output Level +26dBu
Make-up Gain None
Frequency Response 20Hz to 20kHz, +/-0.25dB
Dynamic Range Not specified by manufacturer
Noise THD+N: <0.05% at +20dBu, 1kHz
Dimensions 1.4 x 7.9 x 6.8″ (49 x 200 x 171mm)
Weight 9.5oz (260g)
Specialties Using a switch on the connector panel, module input and output can be set to operate at either +4dBu or -10dBV

Based on 0 reviews

0.0 overall
0
0
0
0
0

Only logged in customers who have purchased this product may leave a review.

There are no reviews yet.

You may also like…