, ,

Solid State Logic X-Rack Channel EQ Module XR625


Brands
  • Single Channel
  • 4-Band
  • Copy of XL 9000 K EQ
  • For X-Rack/Mynx Modular Systems

$1,550.00

The X-Rack Channel EQ Module, XR 625 from Solid State Logic is a 4-band EQ module that requires the use of an X-Rack or Mynx enclosure. Designed for users of Digital Audio Workstations and other audio/post applications, the EQ can be combined with any number of other modules to achieve a scalable system that features the legendary SSL sonic signature.

The module delivers the legendary SSL twin-curve E and G series EQ with the low-mid and high-mid frequencies being fully-parametric with variable “Q”, and the high- and low-frequency bands featuring shelf/bell control. The module input and output gains can be set to operate at a nominal level of either +4dBu or -10dBV, using a switch on the connector panel.

Note:
Module requires an X-Rack or Mynx chassis to function

EQ module for SSL’s X-Rack and Mynx systems that delivers two different sets of curves
Direct copy of the XL 9000 K EQ currently used in the Duality and AWS900+ consoles
The G-EQ button switches the EQ from the classic SSL “E” Series operation to SSL’s “G” EQ
Selecting the G-EQ button provides a slightly steeper slope for both sections with a degree of overshoot/undershoot
At any Q setting, the bandwidth of the high-mid and low-mid frequency sections vary with gain, with an increase in boost or cut increasing the selectivity of the EQ
The high-frequency and low-frequency sections provide shelving equalizers with variable turnover frequency and a gentle slope
Global by-pass button

Filter Type Parametric and shelving
Number of Channels Single
Inputs 1 x XLR
Outputs 1 x XLR
Maximum Input Level Not specified by manufacturer
Frequency Bands HF Shelving: 1.5kHz to 22kHz, variable
LF Shelving: 40Hz to 600Hz, variable
HMF Parametric: 600Hz to 7kHz, variable
LMF Parametric: 200Hz to 2.5kHz, variable
Bandwidth HF Shelving: Q = 2.5
LF Shelving: Q = 2.5
HMF Parametric: Q = variable from 0.5 to 2.5 (may also vary with gain)
LMF Parametric: Q = variable from 0.5 to 2.5 (may also vary with gain)
Range (Boost/Cut) HF, HMF and LMF: +/-20dB
LF: +/-16.5dB
Maximum Output Level +26dBu
Frequency Response 20Hz to 20kHz, +/-0.5dB (-3dB at 200kHz)
Dynamic Range Not specified by manufacturer
Noise <-83dBu (+4dBu operating level)
Dimensions 1.4 x 7.9 x 6.8″ (35 x 200 x 171mm)
Weight 9.5 oz (260g)
Specialties The LF and HF bands have variable turnover frequency with switchable bell/shelving and selectable response curves

Based on 0 reviews

0.0 overall
0
0
0
0
0

Only logged in customers who have purchased this product may leave a review.

There are no reviews yet.

You may also like…