, , ,

Yamaha TF5


Brands: Yamaha
Brands
  • 33 motor faders (32 channels + 1 master)
  • 48 input mixing channels (40 mono + 2 stereo + 2 return)
  • 20 Aux (8 mono + 6 stereo) + Stereo + Sub buses
  • 8 DCA groups with Roll-out

$6,000.00

The Yamaha TF5 is a rack-mountable digital audio mixing console that features a touchscreen display, 33 motorized faders, and is expandable up to 48 input channels by adding the optional Tio1608-D I/O rack. Ideal for a multitude of live sound reinforcement scenarios, the TF5 can also be used for live recording, offering 34 x 34 channel digital recording and playback via USB 2.0 using a computer and your preferred DAW software, and 2 x 2 channel recording and playback using any USB storage device.

The TF5 console itself provides 32 analog XLR/TRS combo mic/line inputs with 48V phantom power, as well as 2 analog RCA stereo line inputs, and 16 analog XLR outputs. Each combo input channel features a recallable D-PRE microphone preamp, as well EQ and two dynamics processors. In addition, the console offers eight powerful FX processors with patches ranging from reverb and delay, to modulation effects such as flanger and chorus, to utility processing like 3-band multi-band compression. The TF5 ships with Steinberg’s Nuendo Live for advanced multi-tracking and virtual sound check capabilities.

FEATURES

  • 33 motor faders (32 channels + 1 master)
  • 48 input mixing channels (40 mono + 2 stereo + 2 return)
  • 20 Aux (8 mono + 6 stereo) + Stereo + Sub buses
  • 8 DCA groups with Roll-out
  • 32 analog XLR/TRS combo mic/line inputs + 2 analog RCA pin stereo line inputs
  • 16 analog XLR outputs
  • 34 x 34 digital record/playback channels via USB 2.0 + 2 x 2 via a USB storage device
  • Download information for CUBASE AI DAW software
  • Optional rackmount kit
  • 1 expansion slot for optional NY64-D Dante audio interface card
  • Optional Tio1608-D Dante equipped I/O rack with 16 microphone/line inputs and 8 line outputs
Brands

Yamaha

Product Type

Digital Mixers, Mixers

Channels

32 Channel

Mixer

Number of Analog Input Channels 16 (10 Mono / 4 Stereo)
Number of Mic Preamps 10
Analog Output Channels 1 x Stereo Master Output

2 x Stereo ALT Bus/Subgroup Output

1 x Stereo Control Room/Monitor Output

4 x Mono Aux Send Output

Max I/O Capacity 16 x Input / 4 x Output
Mix Routing Stereo Main Mix / Stereo Bus/Subgroup
Faders 12 x Channel Fader

1 x Master Fader

2 x Bus/Subgroup Fader

1 x FX Fader

Meters 2 x 12-Segment LED
Meter Range -30 dB to +17 dB Peak/Clip

Signal Processing

Gain/Trim Range -6 dB to +64 dB
Input Pad -26 dB
Dynamic Processing Input Channels:

Compressor

Sidechain Filters None
EQ 3-Band EQ (Mono Channels) 

2-Band EQ (Stereo Channels)

EQ Parameters Mono Channels:

High: ±15 dB at 10 kHz (Shelving) 

Mid: ±15 dB at 2.5 kHz (Bell) 

Low: ±15 dB at 100 Hz (Shelving) 

Stereo Channels:

High: ±15 dB at 10 kHz (Shelving) 

Low: ±15 dB at 100 Hz (Shelving)

Graphic EQ None
Filters Input Channels:

10 x High-Pass: 80 Hz

Solo/Mute PFL per Input Channel, Bus, FX Bus
Channel Output/Source Monitoring PFL
Built-In Effects 24 x Stereo Effect (Type Unspecified)

Performance

Frequency Response 20 Hz to 48 kHz +0.5/-1.5 dB (at 1 kHz, Gain Min)
Output Level +30 dBu at Max Gain
I/O Impedance Combo XLR-1/4″, XLR Mic Input:

3 Kilohms 

1/4″ Line Input:

10 Kilohms (Unbalanced)

Crosstalk -78 dB at 1 kHz
EIN -128 dBu at Max Gain
Noise Floor -102 dBu (Residual Output Noise)
THD+N 0.03% at Min Gain (+14 dBu, 20 Hz to 20 kHz) 

0.005% at Min Gain (+24 dBu, 1 kHz)

Connectivity

Analog Inputs 8 x Combo XLR-1/4″ 3-Pin Balanced/Unbalanced Mic/Line Input

2 x XLR 3-Pin Balanced Mic Input

8 x 1/4″ TS Unbalanced Line Input (4 Stereo Pairs)

1 x 1/4″ TS Footswitch Input

Analog Outputs 2 x XLR 3-Pin Balanced Stereo Main Output (1 Stereo Pair)

2 x 1/4″ TRS Balanced Stereo Main Output (1 Stereo Pair)

4 x 1/4″ TRS Balanced Stereo Bus Output (1 Stereo Pair)

2 x 1/4″ TRS Balanced Stereo Monitor Output (1 Stereo Pair)

4 x 1/4″ TRS Balanced Mono Aux Send

1 x 1/4″ TRS Unbalanced Stereo Headphone Output

Phantom Power +48 V
Digital I/O None
Bluetooth None

Power

AC Input Power 100 to 240 VAC, 50 / 60 Hz
AC Power Connector 1 x IEC Input
Power Consumption 30 W

Physical

Dimensions 19.7 x 17.5 x 5.1″ / 50 x 44.5 x 13 cm
Weight 15 lb / 6.8 kg

Based on 0 reviews

0.0 overall
0
0
0
0
0

Only logged in customers who have purchased this product may leave a review.

There are no reviews yet.

You may also like…