Neumann KH810 II
Neumann KH810 II - Image 2
Neumann KH810 II - Image 3
, ,

Neumann KH810 II

Brands: Neumann
Brands
  • 7.1.4 Channel Bass Management
  • 10″ Front-Firing Driver, 16 Hz Extension
  • Flexible 4-Mode LFE Processing
  • DSP-Controlled Crossover Integration

$5,949.00

10″ Active Studio Subwoofer

The Neumann KH 810 II 10″ Active Studio Subwoofer is a professional-grade monitoring solution designed for tracking, mixing, mastering, and immersive production. Building on the legacy of the KH 810, the KH 810 II delivers even greater flexibility with advanced DSP technology, room correction compatibility, and multichannel bass management up to 7.1.4—making it ideal for music, broadcast, and postproduction environments. With bass extension down to 16 Hz and powerful SPL capability, the KH 810 II provides precise, distortion-free low-end reproduction while serving as the central hub of your monitoring system.
Ready for Immersive Audio
The KH 810 II shares the acoustic design and performance of the KH 805 II while adding advanced multichannel bass management. Supporting formats up to 7.1.4, it is the perfect complement to mid-sized KH Line monitors such as the KH 150 and KH 310, as well as an ideal upgrade path for expanding stereo systems into surround or immersive setups.
DSP Power and Room Correction
Like all the Neumann subwoofers in this generation, the KH 810 II features a powerful DSP engine for seamless system alignment and integration and is compatible with the optional MA 1 Automatic Monitor Alignment system, providing room correction with Neumann precision-even for analog KH Line loudspeakers. This ensures exceptional clarity, accuracy, and consistency in any listening environment.
10″ Driver
A front-firing 10″ driver reproduces frequencies down to 16 Hz, relieving your main loudspeakers from handling extreme lows and reducing distortion at higher playback levels. Magnetic shielding ensures safe use near video monitors and other sensitive electronics.
Bass-Reflex Cabinet
The rigid wooden cabinet with a robust painted finish and high-density rubber isolation feet provides excellent damping against resonance. Dual front-panel bass ports extend low-frequency response while minimizing compression and turbulence, allowing the subwoofer to be positioned close to walls or flush-mounted without compromising performance.
Multichannel Bass Management
The integrated Bass Manager supports audio from mono up to 7.1.4 immersive formats, with flexible routing and independent control of front and rear channels. This ensures seamless integration with Neumann KH monitors for a consistent monitoring chain.
System Volume Control and Remote Capability
An integrated 8-channel system volume control and RS-232 remote port allow for optional centralized hardware control and convenient installation. Electronics can be remotely powered on via 0 or 12V triggers, streamlining integration into professional studios.
LFE Gain and Processing
The KH 810 II provides 0 and +10 dB LFE gain, along with four LFE processing modes for complete compatibility across industry standards and workflows.
Acoustic Controls
Onboard controls include output level, low cut, parametric EQ, and a 45° step phase adjustment with built-in test signals. These allow fine-tuning for your acoustic space and seamless integration with full-range monitors.
Robust Amplification and Protection
The internal low-heat amplifier delivers a peak output of 200W. An integrated electronic limiter ensures long-term reliability by protecting both the amplifier and driver under demanding conditions.
FEATURES
  • 7.1.4 Channel Bass Management
  • 10″ Front-Firing Driver, 16 Hz Extension
  • Flexible 4-Mode LFE Processing
  • DSP-Controlled Crossover Integration
  • 8-Channel System Volume Control
  • Daisy-Chain and Sum Output Capable
  • RS-232 Remote Control Connectivity
  • Integrated Electronic Limiter Protection
  • Compatible with MA 1 Room Alignment
  • Perfect Match for KH Line Monitors
Categories: , , Tags: , , , Brand:
Brands

Neumann
Speaker Size

10"
Product Type

Studio Subwoofers
Monitor Type & Configuration
Active Subwoofer
Subwoofer Drivers
1x 10″ / 25.4 cm Cone
Frequency Range
16 Hz to 750 Hz
Audio I/O
2x XLR 3-Pin Input
2x DB-25 Input
2x XLR 3-Pin Output
2x DB-25 Output
Digital Audio I/O
7x AES-3id Output
Wireless
No
Monitor Type & Configuration
Active Subwoofer
Number of Included Monitors
Single Monitor
Enclosure
Bass-Reflex/Ported
Drivers
Subwoofer
1x 10″ / 25.4 cm Cone
Performance
Frequency Range
16 Hz to 750 Hz
Frequency Response
16 Hz to 750 Hz
Maximum Sound Pressure Level (SPL)
109 dB
Connectivity
Audio I/O
2x XLR 3-Pin Input
2x DB-25 Input
2x XLR 3-Pin Output
2x DB-25 Output
Digital Audio I/O
7x BNC Coaxial AES-3id Output
Wireless
No
Mobile App Compatible
No
Physical
Color
Black
Monitor Orientation
Vertical or Horizontal
Dimensions (W x H x D)
13 x 14.5 x 25.4″ / 330 x 368 x 645 mm

Based on 0 reviews

0.0 overall
0
0
0
0
0

Only logged in customers who have purchased this product may leave a review.

There are no reviews yet.

You may also like…

Related products