, ,

Mackie ProFX12v2

Availability:

Out of stock


Brands: Mackie
Brands
  • 6 low-noise Mackie Vita mic preamps add life to any input
  • ReadyFX effects engine with 16 effects including reverbs, delays, and choruses
  • 7-band graphic EQ for tuning mains or monitors
  • Aux output for monitor mixes, venue 70-volt systems, and more

The ProFX series v2 sounds better than ever and supplies convenient features at every knob, fader, input and output. This is the ProFX12v2. It features 6 extremely low-noise Mackie Vita mic preamps designed to add life to any input, as well as the ReadyFX effects engine with 16 great-sounding effects including reverbs, delays and choruses.

Important features of the ProFX12v2 include:

  • No-Hassle USB Recording/Playback
  • Built in USB recording interface with simple setup via Mac or PC
  • Great for live recording and perfet for home studios
  • Steam playback music for live or studio applications
  • Includes user-friendly Tracktion recording software

Live applications
A 7-band graphic EQ is available on the master output, switchable for tuning mains or monitors, and an aux output is perfect for driving a monitor mix. There is a 3-band EQ (80 Hz, 2.5 kHz and 12 kHz) on all three input channels. The input scheme features six XLR inputs with TRS option, as well as dual 1/4 in. stereo input channels. A built-in USB interface allows recorded music to be played between sets, and you can even use it to bus your mix to a recording device. Insert, 100 Hz low-cut filter and 48V phantom power on all mic channels. 60mm faders.

You can directly connect guitar, bass and other instruments via Hi-Z input or connect a microphone and take advantage of the Vita preamp. It features a 100 Hz low-cut filter and 48V phantom power on all mic channels, along with a stereo RCA tape I/O with input level control. A headphone output with separate level control gives your engineer a second point of reference. The ProFX8v2 also has Balanced XLR and balanced/unbalance 1/4 in. main outputs, an FX mute with remote control via footswitch, and a break switch that mutes all channels for music playback between sets.

Built like a Mackie

Mackie ‘s legendary Built-Like-A-Tank design is reflected in the solid steel chassis, tough ABS side protection, and quality posts and knobs combine to protect your investment. Rugged and roadworthy are two of the most common adsjectives used to describe Mackie equipment. With mixers, that is a critical attribute. For international traveling, the ProFX12v2 includes a robust internal multi-voltage power supply.

FEATURES

  • 6 low-noise Mackie Vita mic preamps add life to any input
  • ReadyFX effects engine with 16 effects including reverbs, delays, and choruses
  • 7-band graphic EQ for tuning mains or monitors
  • Aux output for monitor mixes, venue 70-volt systems, and more
  • 3-band EQ and 100Hz low-cut filter on all channels
  • hi-Z input lets you directly connect guitar, bass, and other instruments
  • 48-volt phantom power on all mic channels
  • Headphone output with separate level control for easy monitoring
  • Roadworthy design with steel chassis and ABS side protection
  • 4 stereo channels plus a stereo return for external effects or stereo playback devices
  • Balanced XLR and balanced/unbalanced 1/4″ main outputs
  • FX mute with remote control via footswitch
  • Break switch mutes all channels for music playback between sets
  • USB for playback music and recording via Mac or PC
  • Includes user-friendly Tracktion recording software
Brands

Mackie

Product Type

Analog Mixers

Equivalent Input Noise 150 ohm source impedance, 20 Hz to 20 kHz:
Mic in to insert send out, max gain -125 dBu
Residual Output Noise All outputs, master levels off, all channel levels off: -95 dBu
All outputs, master levels unity, one channel level unity: -80 dBu
Frequency Response Mic input to any output (gain at unity, +0 dB / -1 dB): 20 Hz to 30 kHz
THD+N 22 Hz to 80 kHz bandwidth: Mic in to Main out (+4 dBu output): < 0.03%
Attenuation and Crosstalk Adjacent Inputs @ 1 kHz: -90 dB
Inputs to Outputs @ 1 kHz: -80 dB
Fader Off @ 1 kHz: -75 dB
Mute Switch / Break Switch Mute @ 1 kHz: -90 dB
Common Mode Rejection Ratio Mic In to Main Out, max gain, 1 kHz: 70 dB
Maximum Level All inputs: +22 dB
Main Out XLR: +28 dBu
All other outputs: +22 dBu
Impedance Mic In 3.8 kOhms
Channel Insert Return 10 kOhms
All other inputs ≥ 20 kOhms
Tape output 1 kOhms
Phones output 25 ohms
All other outputs 120 ohms unbalanced, 240 ohms balanced
Equalization Low ±15 dB @ 80 Hz
Mid ±15 dB @ 2.5 kHz
High ±15 dB @ 12 kHz
Low Cut Filter 18 dB/octave @ 100 Hz
Maximum Voltage Gain Mic Input Channel to:
Insert Output: 50 dB
Tape Output: 60 dB
USB Output: 50 dB
1/4″ Main Output: 70 dB
XLR Main Output: 76 dB
Monitor Send: 76 dB
FX Send: 90 dB

Mono Line Input Channel to:
Insert Output: 30 dB
Tape Output: 40 dB
USB Output: 30 dB
XLR Main Output: 56 dB
Monitor Send: 56 dB
FX Send: 70 dB

Stereo Line Input Channel to:
Tape Output: 30 dB
USB Output: 30 dB

XLR Main Output: 46 dB
Monitor Send: 46 dB
FX Send: 60 dB

Tape Input to:
XLR Main Output: 36 dB

USB Input to:
XLR Main Output: 36 dB

Stereo Return to:

XLR Main Output: 26 dB

Digital Effects I/O: mono input / stereo output
Number of Presets: 16
Meters Main L/R Mix:
Two columns of 12 segments each: OL (+20 dBu), +15, +10, +6, +3, 0 (0 dBu), -2, -4, -7, -10, -20, -30

Channel OL LED:
Measured post-EQ, pre-fader (-3 dB before channel clipping): 18 dBu

Graphic EQ Frequency Centers [7-Band]: 125, 250, 500, 1k, 2k, 4k, 8k
Gain: ±15 dB
Assignable to Main or Monitor, bypassable
USB USB Recording to Computer (Mac & Win)
Phantom Power 48 VDC to all mic channels simultaneously
AC Power Requirements Power Consumption: 30 watts
Universal AC Power Supply: 100 – 240 VAC, 50 – 60 Hz
Class II Detachable Line Cord: Yes
Operating Temperature 32 – 104˚F (0 – 40˚C)
Dimensions 3.6 x 14.6 x 14.1″ (91 x 370 x 358 mm)
Weight 9.0 lb (4.1 kg)

Based on 0 reviews

0.0 overall
0
0
0
0
0

Only logged in customers who have purchased this product may leave a review.

There are no reviews yet.

You may also like…